Every Welder should know this ! Secret Pipe cutting tricks

Every Welder should know this! Secret Pipe cutting tricks

We use the following tools and equipment in the workshop to create our videos

[damonzilliox]

If you cut the corner when the paper is folded you don't have to make all those dots. You'll have little notches at the folds when unfolded.

[firebirdclonefirebird]

wrap paper around each pipe diameter. Fold each paper the same number of times. These templates show the correct spacing for the cut outs.

[Reman]

OK, I have to admit it, that's quite a handy trick.
Most of these "Amazing trick that every should know" type videos that are flooding YouTube are total rubbish. Usually stuff that isn't done that way because it means 3 times the work of the more conventional method of doing it. But this one's actually a really useful (and pretty much idiot proof) way to accurately mark out a reducer pipe without having resort to maths and measuring. I'm impressed.

[Nachnoy]

Not every welder would know this formula not even every pipe fitter. What they know is who they learned from. This VLOG would learn a lot of fabricator/welder. Thanks to you! Keep sharing you makes all of us becomes stronger 💪 IRONMEN.

[Trojan_Rabbit]

You know if you make scoring cuts as opposed to plunge cuts, it will extend the life of your cutting wheels by quite a bit.

[chaplainand]

Thank you and thanks to the other commentaries too. There is so much to learn in this life.

[stevemcevoy]

Your tips and ideas are awesome they are great to do without all the fancy and expensive equipment 👍👍

[damiao]

Adorei essas medida sua; Deu certinho. 👏👏🤙

[TheRitchieLeeShow]

Clever, I may never need that trick. Thanks all the same. Makes perfect since.

[theraven]

A much more elegant take on a reducer, best used in a pinch or artistic purposes. Im afraid if I fabricated a stunt like this on a steam line, I might get an old fashioned ear wringing...great post, pattern development is fun.

[johndavidlayton]

Really ingenious! Bravo!

And some of the refinements suggested below are awesome.

Thanks to all.

[fltchr]

You have have the guard on your grinder and are well practiced with it. For me, those two things are related. Great video, Ron Covell style stuff. Keep your head out of the galvi fumes.

[claudiodelrey]

Muito legal, parabéns, simples, prático e eficiente. Nota 1000 👏👏👏👏👏👏👏👏👏🌳🌎💚

[TERRYB]

Well just shows your never to old to learn something, nice one pal 👍👴🏻

[stephennganga]

Now that is bloody brilliant! Great tip! Thanks a million

[SDIYCreates]

Excelente trabajo 👍 gracias por compartir,

[rickreimer]

I am a welder…. I use reducers…. A reducer is less than the amount of labor dollars invested into said fitting and less residual stresses induced on the finished connection… 🤦🏼‍♂️ Work smarter, not harder!

[vasiledinistrian]

Beautiful, and well worked, Thank you very much.

[toolsgarage]

Wow....Amazing unique skill . I like it 👍

[samholdsworth]

I wasn't sure I could do this but the music really motivated me and was the definitive cause to allow me to actually fulfill my destiny