Z125 Arashi rearset install - project 1

Links in description. The first project in my build series, installing the Arashi rearsets.

[duysince]

Thanks for the video. Saw your amazon review and made me confident in being able to install these.

[JoshDayTV]

good video wish I could've seen how it looked from a further angle.

[minigpracing]

Yes, it works fine as shown near the end of that side. Just rotate the shift lever around and hook everything up.

[bryrr]

Im little late with the comments. I just installed these rearsets on my z125 pro today and the back brake is super tight. Did your back brake ever loosen up over time? I did exactly what u did trying to extend the spring and that helped a little. That stiff back brake is kind of a deal breaker if it doesnt loosen up or break in.

[danandyong]

Life works better if you slow down and think for a moment... next time remove peg bolts/springs, and pivot the brake plunger assembly so the pin faces out! Voila!

[mksmoksmk]

Sure hope that was a locking nut on that Linkage you flipped or it will just pop right off later

[kaylacarbo]

I ordered these for my 17 z125 do you know why it could be shifting so hard? Like I can barely shift it at all. It went down last summer and I had to buy new shift peg and stuff. Before it went down with the oem it shifted like butter. Any ideas? Do you think it's the shift lever on the bike or the arashi set?

[kawiracing]

Adjust the rear brake! That is the most important step.

[elpatl]

Were you ever able to get it to the “GP” shift position?

[ivyivyivy]

So would you recommend? Looks like you could get a longer brake spring at a hardware store

[kaweechannel]

Alright 1 down, unlimitless to go . Is the brake light spring to long to hook it under the return spring ?

[suspensefulness]

question..i have the same set but a 2004 R1 how do i reverse shift (gp) .. shift rod runs thru the frame

[mannyp]

Ok, my question is? Are they Good rest?

[jayppop]

My rear brake doesn't work I have to press it all the way down to engage anyone else have this problem? Thanks for the video couldn't have done it with out it

[jesusnieves]

and thats the stock i dont want to do the stock way... lmfao