Vertex Boost how it works

The Vertex Boost is expertly crafted to be a clean boost, buffer, and volume pedal in one. The Boost is desiged to leave your tone unchanged, while boosting the level of your signal. The Boost also feautres an ultra-linear buffer to condition your line with ZERO tonal coloration, even with dozens of pedals in your chain. Additionally, you have total volume control by connecting the Boost with any EXP pedal and adjusting your volume as you would with a volume pedal. When the Boost is OFF, the EXP will function as a typical volume pedal (sweeping from silent to unity gain). When the Boost is ON, the EXP will control the boosted volume (sweeping from silent to wherever the level knob is set). Since your guitar signal is completely isolated from the EXP pedal, your tone remains open and full-range, and most importantly, it feels like your plugged straight into your amp.

MORE INFO
WEBSITE
FACEBOOK
INSTAGRAM
TWITTER
PINTEREST

#vertexeffects #vertexboost

[RandyRugarMusic]

That's literally the cleanest, best, most transparent boost ever! I used the EP by Xotic for a while but this is an always on..

[VertexEffectsInc]

Brennansdad - Hi there!  Placing a volume pedal after a boost will not achieve the same results as using the Vertex Boost and connecting any volume pedal through the provided EXP jack.  If the boost and volume pedal were placed in series, then the volume pedal can load the previous circuit depending on the pedal impedance, and all volume pedals (even the high impedance versions) will load a guitar if directly plugged into the volume pedal, thereby changing its tone.  It will be worse when the pedal is fully dimed, the volume pedal impedance is in parallel with the next pedal in-line with the input impedance loading the guitar even further.  Another negative factor is a high frequency roll-off as the volume is turned down, which is much worse with higher impedance pedals and probably the reason lower impedance pedals are popular between pedals as they will exhibit this less.  The Vertex Boost isolates the volume or expression pedal from these issues: level and tone changes from impedance loading, as well as preventing the high frequency roll-off regardless of the volume or expression pedal impedance.

[Bruhaha]

And I assume when the pedal is on, you also get whatever character that boost adds to your tone? Or is it extremely neutral?