How To Install 12 Inch Handlebars 2022 Street Glide Special

This video takes you through the process of installing 12" handlebars on a 2022 Harley Davidson Street Glide Special. The handlebar wiring portion has been shortened to keep the video a reasonable length. For a detailed video on how to prep and handlebars, click the following link:

Below is a list of parts used in this video with links:

***Always follow the instructions found in the service manual for your particular bike. Manuals can be purchased at the dealership or online***

The information in this video is for educational purposes only. Ride It Wrench It assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use the information in this video at your own risk. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the user's sole responsibility and not Ride It Wrench It.

[kcrady]

Hats off to anyone doing this themselves versus paying a professional to do it.

[stevenholt]

The best 12" Street Glide Ape Hanger install demo on You Tube!

[Andersonz_]

The best bar install video on YouTube…thanks!!

[bobmorrone]

By far, one of the best DIY videos I have seen to do handlebars. You've convinced me to do my own. Thank you. Keep 'em coming.

[jamespruitt]

Love the video have the same bike little tip. Remove the clutch cable from the clip inside the fairing and run it to the left said. No need for the extension. And when reinstalling tighten the 2 top bolts on the bracket for the handle bar clamps snug the bottom put the fairing back together electrical and all and you can set your bars with the fairing back on and using a ball end Allen key you can tighten the bottom bolts to spec and lock them where you want them.

[cellokustom]

Best video i saw for installing new handlebars! Thank you so much for sharing it with us!

[DaveLeutwyler]

I searched a lot of videos and this was by far the best. My bars were Arlen Ness and the bike was an Ultra Limited but the process was the same for the most part. This helped tremendously. Thx for helping the rest of us!

[ryansweb]

This was invaluable information. I took on the project of installing 12" bars on my 22 Ultra Limited. This video was step by step and saved me a ton of time. There are some wiring differences with the Ultra, and heated grips. Some plugs are the same so take pictures before you disconnect. Going just 2" taller than stock, I was able to reroute the clutch and brake lines and did not need the clutch cable extension. Over 2" would need either the clutch extension, or a longer cable and a longer brake line. Thanks for putting this video together, it was a great help.

[jorgemejias]

Wow, Sir, you are a beast. I am definitely letting someone doing that. I got the parts here but after seeing you doing that, there is no way I can replicate that. Hats off to you. Thank you so very much.

[trentthomas]

Subscribed because of this video. Just installed the dominator 12” meat hooks on my 21 FLHXS. Thank you for taking the time to make this. Helped me tremendously.

[RadioGesicht]

Da hast du dir viel Mühe mit dem Video gegeben, alles gut gezeigt und erklärt. Danke.. 👍

[davidmatias]

I think you’re the only channel I came across that showed how to extend the cable when changing the bars

[Matt-wbrl]

I would like to say great video, I used this video to put bars on my 2021 flhxs. Worked like a charm. the hardest part was the fishing of the wires through the bars. i used the lube that you use for Running wires through conduit for your house instead of grease. worked great. instead of using the grips i opted for heated grips, all working now and i love it. thanks for the great video!

[MrBarman]

great to see you back wrenching again... everybody needs a Margaret 😂

[BJT_]

I did my bars on my 2012 by watching your old video. Great stuff, love the new bike!! Keep up the great work sir. Ride safe!!

[donschultz]

Like i said last week great to have you back awesome video. i have a 2021 street glide 41, 000 miles also do my maintenance but i always learn when i watch your videos.

[ardyrides]

Good video, good audio, good instructions. 👍

[dw]

I saw I subscribed. Between you and your assistant I enjoyed this very much.

[gregbaca]

Very informative and precise. I'm very confident I can do this on my sons street glide. Thanks.

[corynelson]

Just did a YouTube search and this was 1st to come up, watched and saved... bought the pre wired 12" meathooks for my 21 flhxs now to take some time to do this. GREAT VIDEO/CONTENT thank you for taking the time to make this, looking forward to more stuff you put out!...👍👍