How To Program an Infiniti G35 Remote Key Fob

preview_player
Показать описание
Key Fob Keyless Entry Remote I purchased

An easy-to-follow video on how to program a remote key fob for a 2003 - 2006 Infiniti G35.

These Instructions are for vehicles WITHOUT push-button start:
1. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast, the system will not enter programming mode.

3. Insert the key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful.

5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters). **IF YOU ONLY HAVE ONE REMOTE, skip this step**

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch, and open the driver side door.

Be sure to Like and Subscribe!

Instagram:

TikTok:
Рекомендации по теме
Комментарии
Автор

Just ordered the part you linked and followed the instructions exactly. Worked perfectly. Programmed two keys, works for lock, unlock trunk and alarm. Super simple and inexpensive. Thank you!!

arinepon
Автор

Can't believe that's all I had to do, yet I'm glad I didn't have to buy a new key fob. Thank you for the info.

xyz-ivvx
Автор

I know I'm late but, this worked perfectly on my 06 G35. THANKS!

beyedubya
Автор

Thanks a lot life saver 🙏 my key fob stopped working .. very in detail great job 👏

stephkics
Автор

You are the best bro thanks a lot !!!! Worked like a charm on my i35

generalvintagecoachworks
Автор

You’re a good dude. Thank you so much!

OFNAmatiC
Автор

What about the newer style key fobs
“G37 style fobs”

Iamablackkid
Автор

Great video but I’m wondering if you know the solution to my problem? I’ve been looking everywhere for an answer but my hazards simply never blink and I’ve tried doing it many ways even the one you did.

johnnyreyes
Автор

AWESOME, I Just Liked AND Subscribed !!!

kaharold
Автор

Gracias Hermano
Logré configurar mi llave y trabaja perfecto🙏🔥
Suerte y éxito siempre

emmanuelmartinez
Автор

My question is after I programmed it n fob works but how come the new key won’t start thebignii

BillyBennett-kc
Автор

Am I supposed to be using an aftermarket key for this ? I’m trying to use a oem key that comes with that car, and it’s not working. I’m jamming the key in there over 20 times and still no turn signals. My case broke and just trying to use an aftermarket key fob for it.

jkli
Автор

Will this work to reprogram after my car was stolen?

PeeweeIzzy
Автор

So what if I follow all the steps and the key fobs still don’t work? Any suggestions?

Ryan-eo
Автор

Hey, I love your videos. They're straight to the point and are well-informed. I recently bought a new key fob for my 04' G35 coupe. The lock and unlock button works. However, the trunk button sets off the siren. I assumed the alarm button would open the trunk. Yet, it set off the alarm. I even tried unlocking the car and pressing the trunk, and it still sets off the alarm. I tested the original, and it worked perfectly fine. I opened the trunk, and no panic. I bought a second key fob and attempted to unlock the trunk; it still set off the alarm. I was wondering if there was a simple fix to this?

EltonWuIsAwesome
Автор

The Amazon fobs last like a year. Long enough for me for $6…anyway I come back once a year 💯

FlyinBentley
Автор

does this work with the oem key or do i need a new one?

queuefiddy
Автор

I got a new key pob and it doesn’t let me program it I get to the accessorie mode and click the buttons but nothing happens

futfounder
Автор

you’re a god ! easy setup hit a like and subscribed

alexismontoya
Автор

Ok so I'm confused. Can a "2007-2008" G35 key-fob be programmed manually or not?!?!

arearestorations
welcome to shbcf.ru