How to Program A Key Fob For a Nissan/Infiniti EASY! no tools required!

This procedure will program new or existing key fobs to work with your Nissan or Infiniti vehicle.

Below is a link to the items I used.

**This video is being performed by an experienced individual. Any attempt to repair automotive parts or its systems carries risk of personal injury. Always follow safe practices when working on vehicles such as using safety glasses, jack stands, not wearing loose clothing, etc. No guarantee or warranty is implied by these videos. Use the information in this video at your own risk. If you don't think you can perform the job then do not attempt it.

***Any purchases you make using the links provided help to support the channel at no extra cost to you! As an Amazon Associate I earn from qualifying purchases.

#howto #diy #auto

[raffieb]

I got mine from amazon for 12 bucks for a pair 3 years ago, still works, havent had to change the battery yet

[_moes_garage_]

Great video man. Side note.. Nissan really likes to take it in the ignition hole... 😂😂😂

[beotiswright]

Mann, thanks 1 million this was very very helpful. Keep up the good work.

[mynascarfan]

Worked perfectly on 2007 Nissan Quest to program 2 new remotes off of Ebay. Thanks!!

[ismaelyerena]

What am I doing wrong, everything is closed . But it won’t flash the hazards 😊

[johnwilliams]

I have a 2008 Frontier and my key fob works, but it's finicky most of the time, replaced the battery in the fob, but it's still finicky. If I reprogram the key fob like you did in the video will it make it work better?

[arzibanez]

Have a good day Mr RY the car guy, i a question about my 2006 Nissan Xterra off-road, every time I start my Xterra there a white smoke came out to the exhaust every morning hopefully you can give me advice please

[rhef]

How do I clear programmed fobs? I have two Xterra’s and programmed both fobs to both vehicles. My wife HATES it.

[psukmku]

I tried this and didn't worked because every time I inserted the key in and out in the ignition, actually unlocked the doors not allowing me to get the hazard lights to flash, any idea why the insertion of the key followed by the removal the doors unluck, I would appreciate any input at this time, thank you.

[gilbertoestrada]

Hi. I have a question. I replace the clock spring in a nissan xterra 2010, but after I put everything back turn the vehicle on and drive it the dvc and slip lights came on. How can I reset them. Advise please

[jimmytate]

how do you do this with a push to start?

[obiwan]

Very interesting. Thank you. So, theoretical, this method should work for any Nissan cars?! (I just bought a 2023 Nissan Versa S, of which a fob wasn't included.)

[SweetEssie]

What if there's no ignition and you have an Infiniti, not a Nissan.😢

Edit: I got to the step where the hazards are flashing with the red car with the key in the dashboard was also flashing. I put it in accessory mode but the hazards didn't turn off. I couldn't get past this step and I have a Push button. Any help please? 🙏🏾

[charomorris]

Anyone know if there's a way to program an Xterra to unlock all doors on the first press of the key fob, rather than having to press it twice?

[rcnewcomer]

Hello! I really need your help ASAP. We changed timing chain, then when we started engine, it worked rough, and code p0300 appeared, and nothing else. Is that a problem of timing chain or something else, repair station cannot find the reason of the problem?

[PaulaRamos-kwgd]

So are you using your original key because obviously, the new key with the new fob is not working to turn the ignition

[jaguarsolo]

I have a 2010 Xterra S. Does it have the ability to work with a key fob?

[jaguarsolo]

I bite the bullet cause the Fob was no more than the cost of a burger. It worked I have a Key FOB. Thank you Thank you Thank you. Coffee Black coming your way.

[nicolatucker]

Too bad this didn't work for me. I trird 6, 8, and 10 times. Nothing worked.