Roborock S6 Filter blocked or wet without disassembling

Показать описание

I just had enough of this f**** p**** of s*** so I decided to fix this problem on the easy way... Its obviously a design failure from Xiaomi / Roborock to NOT let you clean the inhaust from the little motor... so get your tongs out and tune it

Pee Kaa

Рекомендации по теме

Комментарии

You’re a genius! I successfully used this method to clear the filter on my S6 Max. I didn’t remove the grid, however.
I used painter’s tape to mask-off most of the grid and then more painter’s tape to seal the vacuum nozzle around the remaining (unmasked) grid section. I let the vacuum run for about 10 minutes and tested the vacuum – Success!
Thank you!

richopalka

This worked! You saved me a lot of time and effort. Thank you!

sosbagramyan

Yep, this worked. I duct taped some hose to the vacuum attachment to really get in there at 90 degrees and under the strainer.

MarkSchipper

I’ve had this problem a couple times and this is exactly what I had planned to do. Glad I’m not alone in wanting to remove the grid. 😉

moab

Great, worked for me,
It is good to give it a little bumping on the side while vacuum cleaner is sucking, to loosen the dirt better

gudmundurp

Now I need a vacuum cleaner to clean the vacuum cleaner 😂😂

rebacontube

Perfect., thank you! Worked for me. Bad designed product🙄

MrStansted

thanks, .. just got this error last week, .. and i changed the filter. gonna try your way. didnt know this was a option.

brod

Thanks for the video. I have the same issue.

What I recognized is, that the included brush/knife tool exactly fits the grid. So with this tool I was able to clean the strainer. I don't know yet if it worked, but I am optimistic 🙂

seidlacademy

How did you remove the grid? Mine doesn't come off.

Reconx

Thank Works on S5 MAX, too. The plastic grid is destroyed, but the error message is gone. In suction operation with a filter, this grid is of no use anyway. Or rather obviously: they would have used a detachable grille if they had wanted to! Just look at older models, there its easy to reach and no grid.

TheBlackCat_bln

Vacuum the vacuum, sounds about right

infinity

Nothing for me. The same message. I have to open it and fix it.

vanameintani

Roborock S6 Filter blocked or wet without disassembling

Roborock S6 Filter blocked or wet without disassembling

Roborock S5 S6 Fan Speed Lowered, Check Filter, Blocked Strainer, Error 10 Take Apart

Roborock filter cleaning - Roborock filter replacement - Roborock filter

🤠 Filter Blocked Or Wet 🤔

Roborock filter blocked or wet error 10 fixed!

Robot Vacuum Filter blocked or wet Error (Dreame D9) - Easy Fix

RoboRock dismantle and clean, and solve filter block issue. Maintenance for best performance.

Roborock S6: How to Repair 'Filter Clogged or Wet' Error

Roborock S5 S6 Series Water Tank Filter cartridge Replacement Parts from Factory techTongBo China

Roborock S6 MaxV: My Weekly Maintenance

Roborock S5 Max Error 10 fix / filter clogged or wet

Roborock S6/T6 Teardown: Many screws away from getting root... (Part 1 of the rooting process)

Roborock S6 Error 10 The filter is clogged, but the filter is clean and dry. Where is the problem?

Roborock S6 Xiaomi: The Ultimate Cleaning Power Unleashed!

Roborock S6 - Error

Mi Robot Vacuum - How to clean cliff sensor

Roborock S5 Advanced Guidance — Cleaning of Fan

Roborock s6 maxv disassembly

Reset factory Roborock S6 Pure

Roborock S6 #03 Reinigung

Roborock Vacuum Maintenance - S6 MaxV & S4 - 1 Year Later

Roborock Maintenance for Best Performance

How to Reset XIAOMI Roborock S6 MaxV Robot Vacuum Mop Filter Cycle - Reset Brush Counter on Roborock

Roborock s6 Teknik Servis Tel 03124188120