How To Make A 2.25 inch Bottle Opener Button

You could use a different standard 2.25 inch button machine to make this product. The parts to make this button badge bottle opener can be found at:

There is also compatibility chart on that page that shows other button machines the parts are known to work with.

To make the bottle opener button it is pretty much the exact same as making a regular pinback button. Here are the steps:

1. Load the shell piece in the shell die on the lower dieset of the button machine
2. Load the paper on top of the shell
3. Load a clear plastic mylar disc on top of the paper
4. Rotate the die base and move the handle 45 degrees to suck those pieces into the upper die
5. Load the bottle opener back piece into the crimp die on the lower dieset. The magnet side should be facing down so the magnet touches the die.
6. Rotate the die base and move the lever again 45 degrees to crimp all the pieces together.
7. Rotate the die base and remove the bottle opener button from the machine

You could stop there if you wanted or you can add the keychain feature where you take a keyring and insert it through the holes. Keyrings can be purchased here if you wanted to add that feature not shown in the video.