CLONING AND REPLACING THE EMMC CHIP USING THE UFI BOX

If somehow you broke the OLED eMMC, you can follow this guide to resurrect your console.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
TOOLS

Amaoe eMMC BGA Stencil
UFI Box
Aoyue 986 BGA Rework Station
Mechanic Soldering X XW5
Goot solder Wick
Best Solder Lugs
Leaded Solder Paste Relife RL 400
Amtech Flux NC 559
Sunshine Dual Brush SS022 B
Tweezer
IPA 99%
Hakko FX951 Soldering Station
Solder Mask
Portable UV Lamp Qianli

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
MUSIC
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
CONTACT & DONATION

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

[HeikesFootSlave]

Sthetix = world's BEST chip man! 👍👍👍
You are incredible!
Greetings from Germany!

[badlighting]

Was just looking for a video on replacing an EMMC chip, and now I know how to mod my Nintendo! First, I’ll actually get around to replacing the chip on my laptop.

[OkiDingo]

I would never do this but the video was super interesting to watch.

[TeeeTooo]

I freaking love you man. you are the best. beautiful clean precise work. love and respect from Germany.

[border]

Fantastic work, as always. I just need to find the supplies you used to reball the EMMC. I found the stencil, just looking for the stand.

[consolemods]

very clean work, , great video as always

[gungan]

That was nutty. Never seen a dat0 extension done that way.

[Arturochirinoscruz]

👏👏👏👏👏excelente video ingeniero muchas gracias, saludos desde PERÚ 🇵🇪.

[tsshevchenko]

Thank you very much for this video. I'm dummy in eMMC and I got comprehensive infrmation about everything I need.

[Blue]

@sthetic exelente video, comk quisiera que tus videos tambien estuvieran en español para entenderlos al 100% porque aun se me complican algunas cosas, pero eres un exelente tecnico, saludos desde Ecuador.

[syahrizalyunus]

awesome 👍🏻 finally i able to replace my emmc. but how if i dont have a backup of old emmc data ?

[gabrielcetera]

Hello friend, congratulations on a job well done, I'm trying to fix a multimedia that runs android system in which the defect is the emmc with corrupted data, I confirmed this by replacing the emmc with one from a working device, the device turned on normally, but when I make a clone of the good emmc and fix it in place, then the device does not boot, only the initial logo appears, could you help me to find out what I am doing wrong? thanks.

[killjoygames]

Hi, love your work and I recently accomplished this procedure on one of my OLEDs. You've mentioned that you can use magnet wire instead of the solder lugs. Do you know how thick that wire should be? I've used one with 0, 1mm diameter and I've had a lot of trouble soldering the eMMC back on. I wonder if using 0, 04mm diameter would have been better

[ChrisAnderson-cbcs]

Awesome work!!! Question: if it's possible to do all of that, then wouldn't it be possible to edit the data inside the chip to essentially put hekate/atmosphere in eMMC itself and avoid needing the entire mod chip altoghether?

[saldav]

Okay so you can find either emmc chip on the OLED model, are there specific regions that use only Samsung or is it some kind of lottery?

[fredideljesusdiaz]

Saludos desde Argentina para haverle a un tv box b866v2 se puede

[itechconsole]

So here I tried out of curiosity and to know if it was possible to dump a nand oled soldered on the pcb of a V1 switch with Hekate, it works, it lasts 4 hours lol, it's 1 hour in less than with the ufi box for those who don't have one and therefore for much less 😅

on the other hand with NxNandManager it did not work 🤷
a very interesting video that gave me the idea
Thank you Sthetix

next test with mmcblkNX adapter..
if I have time

[af]

Clean work. If eMMC is damaged, will I get a reading on Multimeter? 0.5-0.8v? After installing Picoflly, it won't boot. it gives a light indication that eMMC is failed but I get 0.6v on the Multmeter?

[HiTechRepair]

It is possible to use the system of another console to finish the image that is needed, greetings

[flaviocarvalho]

Fantastic....one question... is that possible to do the same procedure that you have done on dat 0 with the clk and cmd points on a switch lite? Using the points on emmc to jump to picofly....acidently i destroied the pads of the mother board