Mtk Cpu & eMMC Reballing And Installation

#MMANZILSTECH
ＬＩＫＥ | ＣＯＭＭＥＮＴ | ＳＨＡＲＥ | ＳＵＢＳＣＲＩＢＥ
SUBSCRIBE TO MY CHANNEL MMANZILS TECH AND PRESS THE BELL ICON FOR THE LATEST UPDATE
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
ʟɪᴋᴇ | sᴜʙsᴄʀɪʙᴇ | sʜᴀʀᴇ | ᴄᴏᴍᴍᴇɴᴛ
●▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬●
BGA Ic Reballing Perfect reballing and Installation | Universal Stencil Cpu Reballing | How To Reball Mobile Cpu and Ram | Mobile Ka CPU Universal Stencil Se Kaise Reball Kare | How To Reballing Mobile Cpu with Universal Stencil

-----------------------------------------------------------------------------------

[valervaler]

The chip alignment at 6:12 was priceless :)

[samiraancio]

This video is a game changer! 🙌 The details on MTK CPU and eMMC reballing are super helpful. Can't wait to try this out! 💻🔧 Your expertise really shines through! Keep up the amazing work! 👍

[ginyodquinoa]

if i'm not mistaken you had a pre heat underneath the board so thats why you easily remove the chip

[diyfixtool]

The Mtk Cpu & eMMC reballing and installation videos are great. Everything was explained calmly and in detail.

[arvindgarg]

Hms practical badiya channel mobile repairing ke liye

[mubasheer]

Don't try this on your expensive boards guys. You can limit heating your IC more than what shown in the video by proper method.

[dhwh]

You could've blown away small stuff around the IC, use kapton tape to shield it from the heat and suction picker for the IC, much safer this way

[Druid_Plow]

You can't make your own solder balls reliably. Almost a guarantee that one of those chips is shorting.
They sell solder balls in very specific sizes for a reason, so you don't put too much solder on any one pad. Those screens, aren't for pushing solder paste through, they are for lining up actual balls of solder. Too much solder on 1 pad will bridge several.

[SAhellenLily]

Thank you for making this outstanding contribution to those who can see this video。expect great movres not but just only in Mediatek chip ! Thanksgiving ❤
I leave Mediatek

[gamerelated]

I love the fan cooling at the end! Great solution!

[czpanama]

Your supposed to use a special machine to remove and attach heat sensitive chips. Notice he didn't show you if it posted, or could see the onboarding emmc.

[carmelorossitto]

Well done. When I reball, some balls solder to the stencil. How do you do a perfect reballing? I tried everything but nothing changed. Maybe the stencil is not good or I should use 138c solder paste. I need your advice.

[dexdaps]

Good equipments & professional work

[ГордыйАзер-ищ]

После перекатки чипа надо давать остывать от комнатной температуры, а не кулером, иначе припой может цирк потом устроить

[VisualGadget]

Было страшно когда чипы переворачивал. Там же рассыпуха вокруг давно отпаялась, снести её так - как раз плюнуть.

[doug]

I'm glad I'm before this technology.

[southernflatland]

1. How you get this modern tin based solder to melt at 350c? I've never been able to even get the stuff to melt at any temperature below 370c. Unless maybe my thermal sensor was out of whack or something.. 🤷‍♂️

2. Why didn't you use tweezers to lift the chips? Like, are you TRYING to knock other components loose? I spent around 5 years doing this sort of work, and I surely wouldn't have went about any of it that carelessly.

[damianomartucci]

can you suggest the liquid flux model you use? I am struggling to find something useful.

[JuanGabrielOyolaCardona]

Thanks for sharing 😀👍 greetings from Colombia.

[SaidElbarnoussi-ehsv]

Hello.
I have a question, what you apply before you remove the shield??