Car Rust Repair -How to Fix Rust Pits in a Fender with Glazing Putty & Rust Encapsulator at Eastwood

In this video, Mike shows you the proper way to mix and spread body filler on a fender from our 1989 LX Mustang 5.0 project car.

Contour™ 1-step Premium Body Filler actually inhibits rust and self-etches! Save time in your shop with our "all-in-1-step" custom-blended premium body filler. It contains rust inhibitors to prevent corrosion long after painting, and its unique self-etching properties bite into the surface for maximum adhesion. A great "1-2 punch" to help finish bodywork faster and more effectively!
Rust inhibitors prevent corrosion
Self-etching properties create excellent adhesion
Superior coverage and feather-edging ability
1-step process; no glazing putty required

Fill pinholes and sand scratches with our Polyester Glazing Putty...even on large areas Before painting, use this glazing putty to fill pinholes and sand other minor imperfections that can ruin the look of your final finish. Use over sanded substrates, steel and galvanized steel.
Fills pinholes
Sands scratches and imperfections
Can be applied to large areas without distortion
Mix with other body fillers

In this video, Mike shows you the proper way to mix and spread body filler on a fender from our 1989 LX Mustang 5.0 project car.

Eastwood has everything you need to do the job right - welders, plasma cutters, powder coating supplies, HVLP guns, specialty paint, hand tools, fender rollers, meta fab equipment, abrasive blasters, auto body supplies and more! Since 1978.

[garymccloskeyjr.]

For the rust encapsulator to work do you have to fully encapsulate it by spraying both sides of a panel? I have some stubborn spots where no matter what I do rust keeping coming back and bubbling the paint.

[onehwy]

I have a 1983 G20 van, with rust & pitted holes on the inside fire wall, and around the window. I cannot weld or remove the metal. I've sanded the best I can, what products would you recommend to assist me?? Alex.

[brett]

I know he said you can use either but why did he use glazing putty over body filler? I thought glazing putty was just for small pin hole not a skim coat.

[ianmorado]

I've got rust and inside the craters if you will there are remnant decayed metal. If I grind long enough on the spot I can remove said remnant within that pit. The issue I am having is I have a ton of that mess going on. If I were to use this product- fast etch then the encapsulator will those remnants within that pit stop rusting? Can I depend on that doing the trick OR do I have to be sure to remove the rust out of each pit to ensure that it does not return??

[BrooklynSal]

It may be a lot of glaze for just filling pin holes but maybe he has other irregularities he's trying cover.

[eastwoodco]

Are YOU an Eastwood Guy?  Check out this video from Eastwood to find out:  Funny & Romantic Dinner for Two - Are You An Eastwood Guy?

[mikep]

why epoxy primer was not applied to the metal b4 filler

[eastwoodco]

He's an Eastwood Guy.  Are YOU an Eastwood Guy?  Check out this video from Eastwood to find out:  
Dangerous or Just a Fast Way to Cut Tags Off a Shirt? Don't Try This - Are You an Eastwood Guy?

[eastwoodco]

Links to BUY the products seen in this video are below the video.

[rustusandroid]

You put glazing putty right over the rust pits, huh... Interesting choice.

[marcphillips]

would this glazing putty be ok to use on a firewall?

[Spencerjones_music]

The stuff I use doesn't go on like that

[tyhigh]

I'm not a body guy but I was wondering why you apply the thin film instead of just scraping off the excess just filling the pits, thanks, like I say I know diddly about body work