Oil Change on a Honda GX160 Engine

preview_player
Показать описание
Anderson Industrial Engine is the Midwest's Honda Distributor.

Welcome back to our AIE tutorial series to help you get to know your Honda GX 160. Today we are going to be checking and changing the oil on our Honda GX160UT2QX2 with genuine Honda Engine Oil, using 08207-10W30. Please check the oil before every use. You’ll want to change the oil after the first month, or 20 hours of use, and then every 6 months or 100 hours following that. Before changing your oil, make sure the engine is fully cooled down, and you have your 10mm, 6 point socket and ratchet, as well as an oil pan handy.

First, let’s locate the grey oil filter gauge cap assembly. The location of the cap will vary based on the application of the engine. Unscrew the Oil filter gauge cap assembly.

Pull out the cap and wipe cleanly. To check the oil level, dip the cap back in. Do not thread the cap in further. This will give you an accurate indication current oil level. The specification for the oil quantity is 0.61 quarts, which should amount to about 3 quarters of the way up the oil filter gauge.

Now locate the oil drain plug located on the base of the block. The location may vary depending on the application of the engine. Take your ratchet and loosen the oil drain plug. Once the plug is loosened, fully unscrew it by hand. Make sure you have an oil pan to collect the used oil.

Reinsert the drain plug washer and tighten by hand. Then fully secure the plug by tightening with your ratchet to 13 foot pounds of torque. Do not over tighten, otherwise you will crack the block.

Begin filling the engine with 19.5 fl oz or 577 ML of genuine Honda oil. Always check the oil one last time after refill to ensure the correct amount.

Note: These procedures are the same for all engine models from the GX120 to the GX390, excluding part number changes for Parts.

Рекомендации по теме
Комментарии
Автор

When I was a kid I got a Fapinha Buggy with this engine. Run it a lot from 1979 to 1984. Never changed the oil. My father did it once in 1981 and never more! He teached me to clean the foam filter and oil it and I DID it several times. It only developed a piston slap, only at higher rpms when warmed up, perharps because of plugged rings... but still ran fine.

tomasnokechtesledger
Автор

Hello there. In my honda manual it says to use "API SE or later (or equivalent)". I have API SJ/CF 10w-30 4 stroke engine oil. Is it fine?

peter.s-yt
Автор

I've always filled the oil to the threads or till it's almost dripping out the fill hole? Any one else??

johndeere
Автор

for what is the black oil filler screw on the other side?
looks like there is also another oil drain plug?
thank you :)

alexanderwirth
Автор

how does an oil reserve connect to the engine? does the reserve and the main tank both have to be drained?

VoxaPopsa
Автор

Can you over fill the oil?? What happens when you do and how to fix????

KjJohns
Автор

I was told by the Honda dealer that my GX160 engine could not be started because of "low oil not set correctly". Is this true? In addition, does this mean if the oil level gets too low in the future the engine cannot be started? I've never heard of such a thing but that's what they're telling me.

justkeepingitreal
Автор

Does the band of the oil matter. I know you want to use sae10w30, but i don't think the brand of the oil matters

tylerstacy
Автор

Very helpful. Thank you. After seeing this video, I did my first DIY CHANGE OIL WRONG.

nuclearparaoan
Автор

Hi I have a brand new Honda GX120 & have a black dipstick & a great .What is the black one for please

nigeldean
Автор

2 questions.
Can i add Lucas oil stabilizer to the oil?
Can i use 93 octane gasoline on this motor or on any small engine like kohler?

jjppsanchez
Автор

how often should you change spark plug

alexellis
Автор

disculpe una pregunta yo quiero comprar un motor hondaGX160 me podrán ayudar con mi pregunta por favor desde ya les doy las gracias

publicannuestrasvidas
Автор

The oil fill cap does not measure the oil. When the oil is at the top of the threads in the fill port, it is full.

jdhreiss
Автор

Takes a tad more than 1/2 qt. 0.61 qts. 30 or 10w30

brianchisnell
Автор

Hi..this engine can use 4t motorcycle oil?

MrMi-ii
Автор

Salve bel video se si può avere la traduzione in italiano ne sarei felicissimo grazie.

mariorezzolla
Автор

Torque of drain plug bolt? Thank you

aabc
Автор

I’ve just brought one of these it’s had around 30 hours use so far. When should I change oil ??

alexellis
Автор

Thanks for the video. Is a gx 160 a 5 horse? Also my Honda has two oil fill ports one has a dip stick and the other Don't. One is white and the other is grey??

michaelshults
visit shbcf.ru