EV Charging Solution - Using Solar and Battery plus 1-3 Phase EV Charger 48V 28.8kWh Lithium

This Victron EV charger package comprises 2 x 14.4kW Lithium to give just under 30kWh 48V Lithium Storage the 10kW single phase or 15kW 3 Phase Inverter charger plus Smart Solar RS good for 11kW of solar plus the EV Charger. You can have the The EV Charging Station has two operation modes:
1. Automatic Mode to ensure maximum PV system efficiency: the system detects when surplus power is available and uses only this power to charge the vehicle.
Instead of loosing surplus energy when the batteries are full or instead of feeding back into the grid at a lower price, the energy is stored into the EV battery.
2. Manual mode allows configurable output current between 6-32A.
You also get back-up power for your house. Depending on the configured loads, it may be all of your house or just critical circuits. The time of backup also depends on how much power is being used. We typically see 4kW around dinner time so at the rate there would be 6-7 hours of backup assuming your batteries are full. It also means you can charge the EV during a blackout.
The charging power is controlled in several ways:
• By using the slider on the LCD touch screen.
• By using a web browser via the web interface.
• From a GX Touch 50
• From the Remote Console in the cloud.
#howgoodsthat #traveltheworld #liveinaworld #withoutconsumingtheearth #solar #Scotty #victronenergy #EVcharging #offgridpower

[DuikerIvo]

What we need is a 48v to CCS2 DC-DC charger. Now we have 2 times an unnecessary conversion