BATTERY CELL SPOT WELDER. K-WELD.

I have finally edited the review of the K-weld resistance spot welder.
Two video is one - short version and a longer more detailed part.
Un-boxing , review, assembly, test and conclusion.

[kenspaceman]

Nice video Pavel! I built myself one of these. Biggest challenge for me was to solder connectors to the 8 amg cable from the spot welder. I didnt want to use the suggested bullet connectors for a safety reason, so I used Amass xt120 instead. This connector just about accepted the 8 amg and easily the 10 amg cable from my 3s6000mah lipo. Haven’t tried the spot welder yet, so wish me luck.🙏

[davidlinscheid]

That is high and no doubt well deserved praise from a manufacturer of spot welders, Pavel!
Very interesting presentation of the heat difference between spot welding and soldering.

To be honest, I doubt I could even put the welder together, let alone a battery pack:)

Unseasonably warm here yesterday, so I did a couple miles on the NLS Pro. But we are warned of a blizzard moving in tonight with wind gusts to 50 mph.

I assume those tips have to come in con tact metal to give a jolt, as I could see myself accidently welding my fingers together:)

[josueparedes]

Great video structure!!! Love the lite vs deepdive explanations!

[patrickconsulting]

Great video as usual. I'm saving up to buy one based on reviews and now your video.

[uawsux]

I do not do spot welding for a living not a job every once in awhile I have a laptop battery go bad or a drill motor battery go bad.... there has to be other alternatives for just a very good solid spot welder.... comment below said he paid $12 well you can't get anything today for so in order to get a good spot welder do I have to pay almost $200 to get all the parts and your welding company is now offering the cover for free I think the so what do you know about the other varieties....sunnkko??? aquaion???

[GabrielKozsar]

Hi, do you have a video where you weld above >0.3mm ? I need to repair my Bosch GBA battery but the original tabs are ~0.32mm and I am considering the kWeld with kCap. Thanks

[HandymanCreativeSolutions]

When you say “one of these plugs”, does this plug have a link or a name?

[PavelGarmas]

How many of you build your own battery packs?

[milordas]

full set welder, caps, power is about 500e

[TheMrjogas]

Cant wait to try my one.just got few day ago.i did mistake when order one pair busbar. I need busbars from bottom too I think better 🤔

[eskbuilders]

Pavel, do you have any issue with cable to the battery by getting hot for 10, 15 weld in case of 60 65 J? Thanks!

[georgesmith]

Hi, When you say the Kweld can run up to 30 volts, can you tell me it is WELDING at 30 volts?, very good videos by the way

[ericparry]

Thanks for the nice and complete review! Could you tell me what your kweld calibrates at with your LiPo set up? (At full charge). If you were to buy new batteries would you pick the same ones? Thanks man!

[bob]

I have a question what is your set up for charging the two batterys for the spot welder

[rudecycles]

where can i find the drawing to print the part that holds the tips together? thank you

[thanhbasket]

Hi Pawel,
Could you please share the STL for the box and the pen ? Thanks a lot.

[ledspower]

Hello Pavel, is it possible to have the .STL file for the Kweld angle holder?

[caserio]

i got the k welder i will say is the best out there but i used xt 90 connector but i will love wear i can get the blue ones you got, mines get hot after some welds, so i am interested on the blue connectors you got hear, any link to get them appreciate i you can shear that info. grate video keep it up

[pjarnfelt]

How do you make sure not to over-discharge the batteries while using them? Or is it basically impossible with a full charge?

[youtube]

8:00 At this point you are speculating on how you came by the k-weld, you might not even have discovered the awesome community around kweld ;+)