UNLOCK FREE POWER FROM YOUR SCOOTER (FASTER SCOOTER - EPISODE 2)

Thank you to the FIFTYMil FAM!!! Thank you for donating some of your hard earned income to support me and my YouTube channel through PayPal. Thank you so much for watching my videos and showing me your appreciation for my work. :)

Roy Chan
Jesse Dime
Ali Jänisch
Anh Dep Thanh
Ngai Mai
Peter McManners
Chan Kar Yuen
Christopher Knight
David Philipp
Josif Bastille
TokyoPigeon
Sky Wu
Raymond Yeung

With baseline measurements taken in our previous video, we are now ready to dive in and modify the 2005 Piaggio Typhoon 50cc 2-stroke Hi Per 2 engine.

STAGE ONE (PART 1): De-restricting the bike. Why? Who doesn't want free power. In its pure un-restricted form, the bike will perform like it should have from the factory without all the government regulations to make the bike slower and more environmentally friendly. For the North American models, the only restriction is the brass restrictor covering the 17.5 Dellorto PHVA carburetor opening. European models will have a washer in the variator restricting maximum speed and an exhaust restrictor for emission. In the first part of this video I will show how to remove the brass restrictor. The following episodes will show you how to tune the carburetor after removing the restrictor for peak performance.

*** Many claim that the bike performs worse after removing the carburetor. Some even say that the brass restrictor is supposed to cover the carburetor to IMPROVE performance. While there is some truth to that since PHVA carburetors (slide carbs) are more sensitive to change, I will demonstrate to you if the carburetor is turned correctly, you will see more gains to make this change worthwhile.

If you want your bike to bury the speedo needle like ours did, subscribe and stay tuned for future episodes. We will show you how to destrict the bike from factory, install the Leo Vince ZXR exhaust, open up the intake, and modify the transmission. Come along with us as we transform this little 50cc scooter from a slow and boring bike to a fast and peppy machine that it should've been from factory.

Other bikes that shares the same platform/engine includes Vespa, Piaggio, Aprilia, Peugot, Gilera, TPH, Typhoon, LT50, LX50, ET50, Scarabeo, Stalker, Zip, Fly, etc.

Song: Fransis Derelle - Fly (feat. Parker Pohill) [NCS Release]
Social media: Fransis Derelle

Parker Pohill (vocalist)

Help support my content by using my affiliate links when you buy online through my links! It cost you nothing and greatly helps support the channel!

[uziXwraith]

There is a restrictor in the transmission!
It is on the variator side (rollers side) it looks like a washer, and if sandwiched between variator halves, it actually stops the pulley from getting tighter, removing the washer WILL bring up acceleration and a little bit of top speed.

[omargat]

can you put a link for the jet? the amazon one doesn't work

[Robert-fspb]

Get a high performance carburetor EFI preferable bigger than the one on their or a smart carburetor.amd a bigger air filter if the carburetor don't come with one.or a racing carburetor that will fit to your scooter.

[cjtravis]

Any chance u know how to make a vitacci falcon 250 better

[joshuasalisbury]

I want to do this on my moped but I don’t really know how to jet a bike and how to tell where I am at with it

[salmanbahri]

Can the needle be raised instead of changing the main jet ?

[garydell]

I have a TGB Bullett RS50cc

I’ve taken out the spacer on the variater but still only going like 55Ks

What else can I do do make it go just a little quicker?

[BalkanIsTheBest]

Hello guys few days ago i bought new carburetor because the old one was like bogging did not go and i bought new one i replaced it it was not doing that on the start it was running good and when i ride it it goes but when i give it full throttle it doesnt give like full power when it was with the old carburetor and i dont know what to do please someone tell me

[czarecki]

hello I have a piaggio fly 50 2t yasuni exhaust r whole drive with spezglem variator corrector oversize mallosi air filter polini nozzle in carburetor 74 what to do to turn higher revs on a straight line flies 75kmh about 8000 rota how to increase these revs cdi I haven't moved yet

[FatKidatSpeed]

im getting a bws50 in august and will be going over the whole scooter looking for factory restrictions. winter time i will be doing a 70cc kit

[Thomas-guhz]

Will this work on a 2005 nrg? And also what speed can you get out of it like this?

[KatanaRIDERS.]

Wait are you hearing this it's my new bike coming this summer

[MrBerenguer]

Hi thks four you vídeo I have a Piaggio Zip 50 2T from 2015 I order a Leovince sp3 exhaust I buy a new cluch whit blue and red springs whitch springs you recommended and contra spring I have blue and yellow thank you

[enneff]

Do you juat have to take the thing out?

[GrandpaOnATunedScooter]

I run an Aprilia SR with the same engine. I fitted a pipe, malossi CDI and it said in the malossi manual 65 so I went with that. Runs ok but is that lean or rich? It does smoke a bit on choke but always did. The smoke is white coloured but there's lots of it, would a too lean engine produce less smoke?

[Sean_ODon]

What should I do to make a 50cc 2021 Bintelli sprint faster

[matari]

I have a 2016 TaoTao and it is slow taking off almost like not enough fuel and then it takes off. Will a change in fuel jet work?

[PatriotsGunClub]

Greetings, nice video, title says "Episode 2" ... where is "Episode 1" ???

[richardmonk]

Hi I have a tgb 202 any suggestions on what I could do to make it faster please

[nidasjuodzbalys]

Can you just take out that brass restrictor and nothing else, will just it make scooter faster ???