Lesson 23 Configuring JetBot Operating System In Jetson

Lesson 23: Configuring JetBot Operating System In Jetson Nano
Lesson 23A: As soon as you power up, in 4-5 seconds you can see a black screen on your monitor asking for login, it should look like 4gb-jp45 login: type the login ID as jetbot and password as jetbot
Lesson 23B: After the above step you need to connect your JetBot to your local Wifi by typing the below command on the black screen terminal with your Wifi signal name and password for your Wifi
sudo nmcli device wifi connect SSID password PASSWORD
Your Jetson Nano should now automatically connect to the WiFi at boot and display it's IP address on the piOLED display.
Lesson 23C: Once your JetBot is connected to Wifi, you don’t need a monitor and power adapter, you need to issue the below command on the black screen to reboot and remove the monitor, keyboard and power adapter.
sudo shutdown now. Refer to CodingScientist Manual for detailed steps.

Reach out to me for 1 o 1 coaching, manuals and source code at the following contact details :
WhatsApp: [phone]