filmov
tv
DIY Alfa Romeo / Fiat Power Window Regulator repair
Показать описание
This is a DIY guide, for repairing a broken power window gantry:
1. This is a guide for repairing a broken power window gantry:
2. Remove the door panel.
3. Remove the bottom left Y plate
4. Remove the up left plastic cover. You will take it out, using the hole where the Y plate was.
5. Remove the power regulator. You will take it out, using the hole where the Y plate was.
6. Locate the defective gantry
7. Cut two aluminum gantry drivers with a U shape, and glue them to each side of the broken gantry. Drill a hole through the plastic gantry and the two alu drivers, and secure them with a 3mm bolt and a nut
8. Put everything back in the door
The rear power window is as good as new...
1. This is a guide for repairing a broken power window gantry:
2. Remove the door panel.
3. Remove the bottom left Y plate
4. Remove the up left plastic cover. You will take it out, using the hole where the Y plate was.
5. Remove the power regulator. You will take it out, using the hole where the Y plate was.
6. Locate the defective gantry
7. Cut two aluminum gantry drivers with a U shape, and glue them to each side of the broken gantry. Drill a hole through the plastic gantry and the two alu drivers, and secure them with a 3mm bolt and a nut
8. Put everything back in the door
The rear power window is as good as new...
0:04:29
0:01:49
0:01:34
0:16:35
0:00:41
0:00:17
0:09:30
0:02:11
0:00:14
0:04:14
0:00:57
0:00:14
0:06:07
0:00:10
0:01:24
0:00:14
0:00:58
0:00:22
0:02:25
0:00:19
0:00:21
0:12:12
0:14:37
0:19:20