ANSYS Fluent Tutorial | CFD Analysis of Two Phase Core Annular Flow in Crude Oil Transport Pipeline

Using the multiphase flow approach in a 3D pipe, You need to investigate the crude oil-water core annular flow through a transport pipeline.
What would you learn from this tutorial?
◾ How To Split the face of a pipe into two surfaces.
◾ Application of Projection Tool.
◾ Creation of an O-grid Mesh In ANSYS.
◾ Multiphase VOF model setup in ANSYS Fluent.
◾ How to record & Save the Solution Animation File.

Multiphase flow Tutorials:

ANSYS Tutorials for Beginners:

ANSYS Fluent tutorials:

[safaibrahim]

Thanks indeed,
Very well done.
We would appreciate it if the video explained the slug flow case.

[muhammadihsanulamal]

thankyou very much sir, it's very helped me on my final project

[shamkhalmammadov]

i follow all your instruciton but rend up getting:
Error: floating point exception
Error Object: #f
when I run simulation

[Bittertruthable]

It is a better way to present and the voice really matters

[ahmedalrubaie]

Great video
Sir i used the length of pipe is 25m
I faced problems .
When i completed the calculations
The core annular flow regime was destroy after 4m
From the beggining
And the color gradient didnot continue to the end of the pipe .
after 14m the color becomes only red
If you have any account on social media please send it to me
I want to show you my results

[mohamedhassn]

Error: display-object: No rendering surfaces have been set ! how to slove thıs error

[NaimishPandya-bd]

I'm using a 2022R2 research version and am not able to split the surface into two parts, could you please guide me?

[m.shehryarimtiazawan]

What if I have only crude oil running through the pipe and wall thickness is very small

[advenbrilian]

Why when I was doing the sweep mesh method it failed? I checked the sweepable bodies and apparently no single sweepable body was there. Also, when setting the sweep mesh method, I couldn't find "Algorithm" setting.

[rajje]

sir your version of ansys is higher, recording is not working in previous versions. plese tell to select plane and record animation in previous version 2019 also.

[rishabhgarg]

This video was very much helpful, if possible can you please do a short lecture on membrane separation process too.

[TheVitogol]

Hi, the version r19.2 haven't the algorithm and o-grind divisions options to the sweep method, I'm not getting it, because it gives me error

[kamiben]

Hin thanks again . I am following your video step by step, although I am using Ansys 19.2 I could not find Algorithm option while meshing?

[contera]

Thank you for this wonderful video. Kindly simulate water flowing over the surfaces of ice.

[yusufpolat]

That is an excellent explanation. Many thanks for ur work. May i ask a question. Im working on designing a heat exchanger that heats the R345fa with waste heat of exhaust gas of gasoline engine. In this case R245FA enters the heat exchanger tube in liquid phase and must exit in gas form as usual. My question is should i use multiphase flow analysis for monitoring liquid and vapor phase of R245FA. If u could answer my question i will be very happy with u.

[kabirjungadhikari]

what exactly does the contour of volume fraction(water) mean? And, are we introducing crude oil in a pipe with water.

[ogremighty]

Worth watching!!!And can you explain how can excitation of liquid container be made in Fluent, please.

[mohamedhassn]

the playback of animation showes Not responding ! is there a solution?

[nuramuaz]

Pls in setting the multiphase, you use Courant number of 0.25, is it calculated or assumed? Thank you for the marvellous video

[engr.abdullah]

can we integrate multiphase model with dpm ? as i want to introduce coal in Fluidized bed combustor