ANSYS Fluent for Beginners: Lesson 1(Basic Flow Simulation) | CFD Analysis of a Laminar Flow

ANSYS fluent basic level Tutorials, ANSYS 16 tutorial. Tutorial for beginners.Laminar pipe Flow Analysis in ANSYS Fluent.ANSYS CFD Tutorial on Laminar pipe Flow using ANSYS Fluent.Laminar pipe flow using ANSYS Fluent.

#ansystutorial #cfd #ansysfluent

[qiqi]

Thank you for the tutorial videos, it really helps me a lot in learning the basic of ANSYS software.

I am doing research on Fluid flow & Power consumption in baffled stirred tank. To carry out the simulation, I need to learn how to use the Multi-Reference Frame (MRF) method, and apply standard k-e model to simulate the turbulent flow in the stirred tank.

I will be very grateful if Sir can teach me how to do the simulation of fluid flow & power consumption in a baffled stirred tank by using Ansys Fluid Flow (FLUENT). The stirred tank consists of a single impeller located at the center, and four equally spaced baffles (vertical plate) attach to the tank wall. Water is used as the working fluid that flows under turbulent flow conditions (Re > 20, 000).

I would really appreciate if you can provide a video on how to do the simulation.

Qi

[cmychang]

Hi,
I have a issue where for a hose, when I put a inlet pressure, the inlet velocity is not what I desired of. For example, when I put 10m/s inlet velocity, the inlet pressure will become 152 pascals. When I put 152 pascals, the inlet velocity became 12.9 m/s. Is there any solution to that?
Thanks

[rudimentofmaths]

Please I am having a very serious issue with my research. Part of my research is on Two-Phase Flow Boiling. Unfortunately, i have search through and watch most videos on youtube but i cannot find any ANSYS FLUENT Modelling for Two-Phase Flow Boiling in a vertical pipe of uniform heat flux. The Fluid is Water-Gas flow.

As part of my preliminary research, I must learn and know how to model Flow Boiling in a vertical pipe sing ANSYS FLUID FLOW (FLUENT), showing different flow regimes (i.e bubble, slug, churn, annular and wispy annular). Until I learn this, I will not be able to proceed and face the main aim/objectives of my research.

Please sir, I will be very grateful if you can help me with the ANSYS FLUID FLOW (FLUENT) Tutorials for Two-Phase Flow Boiling in a Vertical Pipe of a uniform heat flux, showing different flow regimes. The Fluid is Water-Gas flow.

If I should understand how to model this, then it will be a better start point for me to tackling my project.


Thanking you in anticipation of your kind help.




Charles

[prosenjitsingha]

sir while extruding the pipe, you have selected add material. what will be the effect if we select ass frozen? Please reply

[moemayali]

Can you please help me modeling a cfd analysis of a flow coming downward out of a vertical pipe and hitting a horizontal plate?