Nissan 350z 💥 Stroker 4.2L Twin Turbo Full Build List 608WHP 💥 541WTQ

VQ35DE DYNO TUNED 608WHP 💥 541WTQ at UMS Tuning. Interview with the owner of a Nissan 350z APS Twin Turbo fully built 4.2L Stroker VQ35DE. Not only some pulls, but I show the build list of parts, along with the dyno sheets for 608whp/541wtq.

WHP - 608whp on 91 octane (14psi), 715whp on C-16 race fuel ( 23 psi )
Fully built 4.2L Stroker Kit
APS Extreme Twin Turbo Kit ( 1,000 HP )
HKS F-CON with boost controller
Darton Sleeve
JE Piston
Brian Crower rods
Brian Crower stroker crank
Brian Crower Valve train ( complete )
Brian Crower cams

Kentix - Manifold
Clutch - Spec stage 5 ( 1,000 HP rated )
Brakes - Stopteck BBK 355mm all around
Suspension- ARK fully adjustable
Fuel - Dual Denzo pumps
Wheels - Traffic Star - 19x10.5 Front, 20x11 rear
Tires - 275/35/19 Front and 305/30/20 rear

Body - Authentic Veilside widebody kit imported from Japan. 1,000's of manhours at Henry's Autobody
Paint - Candy Raspberry

I love YouTube and decided instead of consuming, I wanted to start creating! So please subscribe and I'll do my best to create the most entertaining and helpful videos possible for the G35.

Please subscribe to my channel.

Performance Mods:
- KW v3 Coilovers
- Injen CAI
- NWP 75mm throttle body
- Motordyne MREV2
- Motordyne 5/16th spacer
- Motordyne v3 ART pipes
- Motordyne Shockwave TDX2 exhaust

#Infiniti
#InfinitiQ60
#InfinitiG35
#InfinitiG37
#Motordyne
#nissan350z
#nissan370z
#nissanGTR
#twinturbo350z

[MotordyneG]

5:02..WHP - 608whp on 91 octane (14psi), 715whp on C-16 race fuel ( 23 psi )
Fully built 4.2L Stroker Kit
APS Extreme Twin Turbo Kit ( 1, 000 HP )
HKS F-CON with boost controller
Darton Sleeve
JE Piston
Brian Crower rods
Brian Crower stroker crank
Brian Crower Valve train ( complete )
Brian Crower cams

Kentix - Manifold
Clutch - Spec stage 5 ( 1, 000 HP rated )
Brakes - Stopteck BBK 355mm all around
Suspension- ARK fully adjustable
Fuel - Dual Denzo pumps
Wheels - Traffic Star - 19x10.5 Front, 20x11 rear
Tires - 275/35/19 Front and 305/30/20 rear

Body - Authentic Veilside widebody kit imported from Japan. 1, 000's of manhours at Henry's Autobody
Paint - Candy Raspberry

[RGVFORSALE]

Probably one of the nicest looking - if not THE nicest looking Z I've ever seen. That colour and bodykit is just amazing. Obviously a LOT of money put into this beast!.

[nobledunkley]

Looks like it came out of the factory that way. Very professional-looking work

[BigHeadClan]

I actually really like this 350z build, the glossy dash it too much for me but the rest of it is just sweet. I do love how the engine bay turned out as well.

[sarmatiancougar]

A 4.2 L V6? That is one huge engine. Always wanted to see Japanese technology and American love for displacement in one engine.

[kisnix]

2:03 "get that Dorito spinning" 😂😂😂😂I'm done

[Yohasbing]

4.2 twin turbo, that’s the deepest and rowdiest VQ i’ve ever heard. Ideal sound🤙🏻

[marshallwillis]

Very clean and well executed. Every mod looks professionally done.

[RotaryB]

That is the most bad-ass Z I have ever seen absolutely gorgeous!
Whoever built that car has easily dumped $100K or more into it.
This is the same engine route I want to go with a Brian Crower 4.2L stroker kit with Darton sleeves and a custom Single turbo setup my goal would be about 750+Whp on 93 Octane and at least 850+whp on E85 at reasonable boost pressures.

[louiienation]

I’d expect more power with a stroker kit at that boost level…

[GIOVANNITHGFAN]

Nice set up and that color is sweet. I was expecting a little run against the G 😁

[DragSlicks]

One of the best Z’s I’ve ever seen 100%

[young_reezzyy]

The color & the performance setup is definitely perfect on this 👀🔥

[SicSemperBeats]

never seen a z that looked that good. cranberry/rasberry/burgundy are my favorite colors for candy/gloss wraps

[handsomemarco]

The best mod z i ever seen as far looks color and style and performance 👌

[christiancuneo]

That must be a really conservative tune.. that should easily be capable of 1000hp depending on internals

[GrayFox]

608whp from a 4.2 stroker? I have seen built stock displacement 3.5L motors make 600whp. 4.2L should be in the 800whp range.

[ScrubFishin]

I love how easy I can tell this is Arizona. Miss it.

[bingbingfishing]

I cant wait to build my car again.. It gives me hope... That z is saucy..

[brandongotsole]

Wait did this man pull out a booklet of all the mods 😂😂, almost like a damn remote control car