How to make double kingpin trucks SUPER STABLE

If you find the stock setup for your electric skateboard’s double kingpin trucks to be too unstable for high speeds, try this bushing combination. Note that everyone’s preference may be different so adjust as needed, but this should be a good starting point.

2021 ALL-TERRAIN DISCOUNT CODES

Backfire Hammer: DKHAMMER
Boundmotor Flash: DKWAN
Exway Atlas: DKWAN
Meepo Hurricane: DKHURRICANE
Onsra Black Carve 2: DKWAN
Ownboard Zeus: DKWANZEUS
WowGo AT2: DKWAN

Main account: @DanielKwan

[DanielKwanExtras]

I should have pointed out that I’m using only BARREL bushings for the rear truck, no cone bushings. I mean you can see they’re barrels but for anyone new to this stuff.

[tommynguyen]

150lb, Riptide 87A/84A bushings here. It's a really carvy setup that has a healthy amount of rebound for me. Takes a bit of getting used to riding but it's pretty stable and handles nicely in my opinion.

Rear truck
1st Boardside - 1/2 height 95A bushing + Aluminum Spacer
2nd boardside - 87A barrel bushing
1st roadside - 87A barrel bushing
2nd roadside - 84A barrel bushing

Front truck
1st Boardside - 1/2 height 95A bushing + Aluminum Spacer
2nd boardside - 87A barrel bushing
1st roadside - 87A barrel bushing
2nd roadside - 84A barrel bushing

[bournechupacabra]

Can't wait for the Zeus and hurricane reviews

[kenspencer]

Just snagged the last 97A off Amazon at the moment. Stoked for the Hurricane but should be getting it like halfway through winter so got plenty of time to tinker, thanks for the advice!

[pmyqwmw]

Ive put cnc washers from exway + venom plug 95a/93a double barrel combo on atlas. The plugs are made for caliber, but if you cut them a bit they fit. Feels pretty stable

[spyplane]

Can't wait for the Flash review!!

[auert]

I did the same thing to my RX3 when I saw your last bushings video with different front to back. The cup washers make a massive difference and I don't understand why they are fitted as standard.
The RX3 curves sweetly and is super stable right up to its max speed. It only gets sketchy going downhill beyond its max speed without power.
I only wish I'd have waited for the Propel Endeavour because the RX3 is a great commuter board, quiet and almost no maintenance it just doesn't excite enough.
Calling them all terrain is a push, there more street boards than street boards especially in the UK.
There's not enough perfect tarmac here for anything less than a big wheel. ✌️

[henrismith]

Please recommend something for a 120kg rider. Durometers etc.

[adrianrivera]

I need some help I put lock tire on the screws for the motor mount and they leaked into the motor and now is squeaky and tough to move. Can I just apply acetone or will this cause more damage and the screw to take the motor apart slips so ehh

[jonnybryant]

Preciate this video because I can't go over 22mph on my boundmotor flash without wobbles

[wolfkoolaid]

I'm 140-145 pounds. My set up was from back board side to front road side : 87 purple venom eliminator/ 87 riptide white short street barrel / 87 venom purple barrel/ 87 riptide white short street barrel/ 87 venom purple barrel/84 red short street barrel /85 venom yellow barrel/ 84 red short street barrel. cup washers on all board sides and back road sides. Sleeved washer worked on first front king pin but had to use a flat washer for second king pin because it made a loud clicking noise.

[R.u.x.x]

What's the point of locking out the back? Why not just use different trucks that are more stable to begin with instead?

[garrettaspinwall]

I’ve got a B-one Hercules and I was looking for pivot cups but I’m not sure what size. Also with the bushing “spacer” what would you recommend for a 110kg rider? The stock setting felt decent but I’m commuting and am looking for stability, I’m a newbie so any help is appreciated.

[albertolopezdelgado]

I'm 66 kg i just buy the meepo hurricane which bushings do you recommend me

[douma]

How do you like the flash. Just received mine today fell twice the thing is such a beast and way too wobbly. Where do you buy these bushings from?

[quentinquentin]

And do you like the dkp bushing Riptide kit ?

[highestvirtue]

How fast can you go with this set n carve?

[Ian]

I'm 200 lbs dude I had to get 100a bushings LOL

[khaliltheking]

So when are you gonna review this boundmotor flash 2.0. ? Is it me or you usually avoid VESC boards?

[rango_unchained]

I'm a big old fat guy, over 300lbs, and new to electric skateboards. I want to get the Meepo Hurricane, but I'm not sure if I should be concerned with the stock bushings on that board?