RV Furnace blower does not start Solution

@samowens The condition of trouble is that the furnace will not start at all, no motor blower run to begin operation. The red trouble indicator light is on solid. I show all steps to correct the problem. Click on link below to order part.

Commissions earned.
Chapter segment list
00:00 Intro
00:46 Problem described
01:09 Diagnostic chart described
01:48 Trouble demonstrated
02:00 Service switch shown
03:04 Show removing control board
04:53 Show installing control board
06:33 Testing new control board

[philadams]

Sam, what a pleasant person you are to watch. I am commenting before I go out and try to diagnose mine (Suburban). But even if this video does not solve my issues, I wanted to say how much I appreciated your very understandable, simple to follow instruction.

[glennjames]

Thank you Sam! Another very helpful video. Your other video on the converter was very helpful and now this one too! My rear furnace has a solid red light. I have ordered a new board for it!
Again, we have the same exact 36B 2003 Fleetwood Pace Arrow and you are so very helpful!

[garygibby]

Thx Sam mine made a pop and won’t turn on sadly I don’t have a rear heater as ours only has one heater so I’m guessing the pop was the board controller thanks for this video makes me confident I’ll fix ours

[outdoorsman]

Dinosaur electronic ignitor boards are sold and not Farley priced.

[NorthGhost]

Mine did not have a light and I was able to solve the issue by unplugging the shore power and removing the negative terminals from the battery. After reconnecting it fired right up. Hope this helps someone because those boards are very pricey.

[daygona]

What if you don't have a light on it? 🤪

[jaimelopez]

Hey Sam, many thanks for your video and great explanation. I have a Fleetwood Revolution 40LE from 2006 and my Zone 1 works great; however, Zone 2 doesn't want to ignite. I don't see any lights so changing the board at this point wouldn't work. I'd like to start with the breaker or fuse. Do you know where the location is? Thanks!

[then]

resolder the 4 points on black box and the old board will work again that why there is a core when you buy a board