#31 BEST FINISHES FOR TILE COASTERS SIDE BY SIDE COMPARISON TEST OF 4 DIFFERENT SPRAY CLEAR COATS

#tilecoaster #clearcoat #flowart

What’s the best finish for Tile coasters? Side by side comparison Clear Coat Testing 4 different/new spray clear coats on tile coasters. Some of these were suggested after previous spray coat testing video. Hope this helps! I’ll be testing more finishes in later videos. Comment any others you suggest or would like to see demonstrated in another video. Will also be doing a Resin tile coaster test video at a later time!

If you have another finish for me to test, leave it in the comments and Ill see if I can get it to add to a future video.

I’m still learning and loving it! ❤️ One pour at a time!!!!

Any tips and comments appreciated for this pouring newbie!!!

Thanks for watching!

[agould]

I’ve had good success with the Dupli Color one you tried. I sprayed 3-4 coats with 30 minutes in between then set the tile out in 85-90 degree sun to cure for 4 hours. Next morning I did the hot coffee test with no sticking! It was a darker tile so I saw no “yellowing, ” there were some white parts on my design that do not appear yellow.

[RainDropps]

I use karmar spray sealer first (3 coats) let dry between each coat. Then VHT same amount of coats. Bake at 250 for 20 - 30 minutes my tiles did not yellow at that temperature.

[hfrt]

I wish I could find a video of sealers that aren't sprays. I can't use a spray because of the sides of my projects.

[Makshapiro]

Thank you so much for testing all these sprays! If you were to compare the Dupli-Color Acrylic Enamel that you used in the last tile test to the Dupli-Color Engine Enamel, which do you think was better? Did you retry the Dupli-Color Acrylic Enamel to test if the bubbles that were visible in the last video disappeared when sprayed at the recommended temperature? Have you also had a chance to retry the Dupli-Color Engine Enamel without curing to see if it caused the yellowing? I've never sprayed coasters before and was wondering if you sprayed the sides of the tile as well? Do you have any tips on spraying the tiles?

[donnaguyton]

Wondering, are they waterproof, ie sweating beverage glass.

[MsVerao]

Hi! Have you tried Brite Tone by Crystalac? I'm thinking of using that one...

[ChrissyC-ejvr]

Just wondering was the “follow up” for this video ever done???

[matyasnoemi]

Hi how long let them dry before us spray? I used aft 2 days Spraymax2K and got circle print on coasters, no matter what type of mugs /glasses I used.

[kmarks]

You mentioned seeing brush strokes on VHT. Do you spray then use a brush to spread it around?

[paisleypeacock]

Thank you for these tests. Where did you get the tiles? Which brand are they?

[p.k]

For the Spray Max 2k clear, did you also activate the hardener thats on the bottom of the can? I can see the red cap on the lid which suggests you might not have...

[ShoryoTombo]

Do you apply top coat sealant first before you apply the heat resistant clear spray?

[charmainemurphy]

how do you heat treat the coasters after you use VHT enamel engine spray? do you have to use a oven? or can you just spray them? ur use something else?

[kimt]

Where did you do a heat treatment? You say outside??

[NA]

So after you spray and after they dry are you saying bake in the oven at 200 for 20 minutes?

[gerryw]

I tested the diamond sealer. I sprayed my tile with 5 coats, every half an hour inside so the temperature was about 70 degrees with little humidity. I let it cure for 3 days. I tested with a 12 oz mug of water heated to 180 degrees. Let the mug sit on the tile for 10 minutes. It stuck and left a ring. Not sure what I did wrong. Would you please give me some advise? Thank you.

[allieb]

Did you try the Dupli-Color again without the heat treatment? :)

[aaronfuksa]

Does Polyacrylic aerosol not yellow??? Making sure...i use a clear coat as a middle coat, & binder for flakes before brushing expensive sealer/resin on.

[TheRaviebaby]

What happened to the diamond finish spray? I was thinking of going with that one.

[FilomenaDapaz]

and we are here waiting. for the results