3018 Pro Upgrade | Make it to Double working desk.

Upgrade the machine with this extension kit, so that we can make a bigger project.

[zmanfishing]

The added surface area is great, but you need to set Gantry to 125mm and with this kit you lose alot of Z axis movement due to the supports under the table.

[glennskorb]

You need to move the Gaunlet further forward to use the extended base, I ran the table all the way back then move the tip to 0, 0 axis front left, and tighten the guantlet I now have almost full table use, dont forget to upgrade the size in software

[tratzum]

The y is extended sure. But making the bed bigger reduced it total travel. Making working size smaller?

[mciarlillo]

Is the gantry frame bolted with T-Nuts or does the frame have tapped holes?

[commandos]

The front plate of the base is upsidedown an this mildly annoys me.

[Mik_er]

Can you tell me Were you sourced this kit? I’ve already extended my y but need the plate/work are extension. I like the way this combines 2 work area plates. Thx