Beko wm74135w error reading and test mode

[glodzio]

It works also for BEKO WKB 51031 and all others with the same panel look. GREAT JOB and HELP for many people. Thank you man!

[mrjonnyjones]

Hi Tim, we had the same problem with this exact model. Your initial button press combo worked, however the machine wouldn't go past the error code (E18, which is meant to mean an unbalance load). However we opened the door, closed it, and this (for some reason) allowed us to cycle through the test processes as you showed in this video. So your video has been very helpful, you saved all of the housemates from having to go to the laundrette!

[Boma]

Thanks so much! This worked on my Beko WTK82011W washing machine! It was flashing end light no matter what setting I put it on and wouldn't start. This reset worked and now my machine works as usual! 🙌

[abdeltari]

God bless you guy !!! you saved me ! my washing machine mas new, impossible to start it !!! was waiting for a technician and ... I found your video !!! Thanks a lot, you restored peacefull in my house !!! BEKO UWM7014RO

[jefffinch]

Fantastic video! I thought my machine was ready for the scrap heap but it’s now as good as new. Thanks

[beccywheeler]

Thank you so much this just saved us buying a new one 👌

[needle]

You saved the day man !!! Thank you so much for sharing this.

[humbertotrigo]

I’ve done this with my Beko.Thank you very much Top Man.GREAT JOB and HELP for many people.

[yeshuaQ]

Hello I did a factory reset on a below and I only held the start button then turned the dial to cotton it comes up with e18 then I do the same as what you have done in your video u didn't have to hold the spin button. It amazes me how the below program can get mixed up the washer I did a reset on wasn't spinning I did the reset and it worked the spinning. Iv downloaded this video to show my friend when he's washer goes Pete tong

[phil]

Thanks for this, saved my bacon on a Sunday evening!

[bradpinches]

Thanks for that. Also works on the WMB 71231.

[washinglad]

On these models, you don’t need to hold the spin button, only the start button :)

[nickneocleous]

Thank you for that video very helpful but unfortunately when I go for the error codes the motor is not spinning is there any way of checking why their motor is not spinning as I have tested the motor and the motor is working fine

[diegovd]

Hi, the first number '57' could be the software version, I saw that on a different video. Cheers

[glennpedrosa]

Hi Tim 100. How can I reset/ diagnose my beko 7k washing machine model number wm74125m?

[lucavasile]

Hello. My machine is wmy71033lmb3. In test mode when the water has to be heated nothing happens. Not even the drum spins.That means the heater resistence or ntc sensor is gone?

[theleaguehgs]

My washing machine didn't spin the first time I did the error test run so I did it again and the cycle started but there was spark at the bottom inside of my washing machine just as the cycle started . Should I be worried or just do another test run to be sure its safe ?

[dubstepah]

Hi Tim I have the same machine, I am getting no power at all, no display when attempting test mode, plug fuse is good. over the last 6 months the machine has slowly taken longer to power on and now will not power on at all, any ideas what to test next?

[gabrielleormerwood]

Hi, my machine only shows E8 code, it will not run through the test mode. I've done everything else suggested, checked all filters too.

[xxxmickyxxx]

So glad I found this video. Washing machine wouldnt start and had stopped mid washing. As i went to reset the machine with the first step after the error code e18 appeared and i clicked start nothing would happen. So i opened the drain tube at the bottom corner of the washing machine and also opened the other thing next to it. After draining the water and cleaning the holes, I proceeded with the reset of the machine as shown in the video and it finally worked. Thank you