2002 - 2009 Chevy Trailblazer / Envoy Backup Camera Install

Parts linked in the description below!

Watch a full tutorial as a 2008 Chevy Trailblazer / GMC Envoy will have a brand new backup camera installed. We will be adding this camera to an existing aftermarket touchscreen radio installed previously.

This video applies to Chevrolet (Chevy) Trailblazer, GMC Envoy, Buick Rainer, Isuzu Ascender, Oldsmobile Bravada, Saab 9-7X, and some Chevy Colorado (2004 - 2012) models for years 2002, 2003, 2004, 2005, 2006, 2007, 2008, and 2009. This video also includes dash trim and stereo removal, wiring, camera installation, and testing.

Click here for the radio install video:

Click here to see the radio unboxing we used in this video:

If you have any questions, leave a comment below! Be sure to like and subscribe!

Recommended backup cameras (Amazon Associate Paid Links):

Radio Install Parts Used (Amazon Associate Paid Links):

*Disclosure: As an Amazon Associate I earn from qualifying purchases*

[ProvoBeastAudio]

Parts used linked in the description of the video!

[louietrabal]

This video was spot on. The most invaluable tip for me was to use soap when running wire through grommet. That alone saved me tons of aggravation. Thanks again for this wonderful video. Keep up the good work.

[TylerYaweh]

I used a piece of 12awg romex to fish thru the rubber tube at the top of trunk, took about 20 seconds no issues

[rlvtrader]

Damn that rubber grommet to HELL!!! I just took a break from finally pulling the cable through that thing. My hand is totally cramped up. The issue is the bottom part of the grommet, which has barely any give to let the RCA jack through. In hindsight, I should have just cut off the RCA jack and re-attached it after fishing the wire through.

[greenganjablue]

The video is good as far as showing the wires getting ran. But I need to know how the power wire is connected to the back of the radio.

[kamanoBFST]

Hi, I installed the same model on my 2008 trailblazer and the backup camera as well. Everything was working great until suddenly the screen went fully black. Can you assist on this ? Thanks

[SparksandBubbles]

What's the link for the coupler ?

[lasonblackmon]

I used 20awg instead of 22 could that cause it not to work?

[ZareefHuq]

How much slack did you have left on that RCA extension that you used? I have an Envoy XL that is 16 inches longer so I'm wondering if I should get a longer extension.

[moveit]

I order the crux harness for my trailblazer connecged all wires color coded and works great when i turn the key to acc on position but when i start the car there is sound any idea why?

[aaronechols]

After it's hooked up do you need to change the fuse #39 interior fuse box to a different fuse?

[bryanwoods]

Unfortunately even though it lists my model year in the description my model year 2002 the reverse light is not in the tail light assembly so it is not so easy. I have watched a lot of these videos and all are the same, they pick a year that is easy to do and then leave out the details for the actual model you are looking for. I think 2004 and up the reverse light is in the tail light assembly, but in 2002 for sure the reverse light is separate and is in the bumper so you need to trace the wiring from the light and find where the heck it comes into the cab, if it ever does at the back in order to splice in. I have wasted upwards of 30 hrs trying to find this information online, where it would have taken me at most 3 hrs and a car hoist to find where it is on my 2002. frustrating to no end

[ImYourHitBox]

Ok I have the same car and did what u did and no power when in reverse

[jam]

Súper late comment but does this have apple car play?

[JustinLynch]

What did you use to seal the external hole for the camera wire?

[greenganjablue]

I tried this and ripped all my wires to hell trying to pull the wires through that tiny rubber boot. This is nowhere as easy as it seems on your video.

[ganeshnarayan]

Hey Chris love your content keep it up Brother.