Tutorial Inventor - 235 FIXING CLAMP - SHEET METAL

Every tutorial brings new abilities.
You can slow the film on Youtube by using the Settings (bottom right), selecting Normal, and choosing a subunitary Playback speed. If you misunderstand what I say by voice, then click on the CC and activate the English auto-generated subtitling
============================
IMPORTANT (English) - If you want the drawings for the parts in my collection of 100 parts you can buy the book ALBUM (4 euros) from Google Play by accessing the below link. Drawings are a universal language.
În principiu este bine să se orienteze spre cărțile „MANUALUL (Inventor - 658 pag.)”, „ÎNDRUMARUL (Inventor - 374 pag.)” și „ALBUMUL (Orice CAD - 208 pag.)”
============================
If you click to SUBSCRIBE you will be immediately advised when a new Tutorial is released!

[MercedesBenzSLAMG]

This was extra beautiful ! imagine getting that model not using sheet metal ! it would take more time, and also the last hole was complicated more than i expected ! i thought you was going to use the punch tool, but it was so interesting seeing how you created a whole sketch to come up with the driven dimensions ! so so interesting ! Thank you Professor for sharing all your ideas live with us :)

[prostoCAD]

Thanks for the video professor. I have a question about the hole: you can make such a hole in advance, so that you can use it later. To do this, you need to make a stamping. For a hole in sheet steel, the rule will be the same, only the thickness changes. If you have time, then please make such a preparation, my hands do not reach this, otherwise I would do something similar. then just put a dot, and the hole according to the rule and thickness is already ready. Thanks!