Depron and Modelling Foam Building Techniques

How to work with Depron and Modelling Foam. This video briefly explains the following topics.
1. Tracing Parts to Sheets
2. Cutting Depron
3. Undercutting Surfaces
4. Attaching Control Surfaces
5. Sanding Depron
6. Gluing Depron
7. Bending and Forming
8. Decorating

[HaraldBendschneider]

6:35 You're the man! This tip saved my day! Thank you!!

[mectorocks]

1:40 Dont always change the blades like that, the chances of the fresh blade in cutting your finger is high. I had an experience in which I cutted my nerve in the left thumb, so much blood was lost. In my case the blade was not on any table or something, just on my hand, but always be careful.

Edit : spelling mistake

[wizardOfRobots]

my god that marker looks like a mini cannon

[peterismobiel]

Excelent video.
Your parts almost look like laser cut parts.

[Tractor-boy]

Great tips
We’re always told never use a metal rule and a sharp blade because it runs across metal .
Always use a wooden one where it digs in.

[savxssfan]

Great Video !

There is another way to transform your Paper Plan to the Depron:
Glue it directly on it with a small amount of spray glue or a gluestick. You can easyly peel it off when you are done with cutting.

Bending Depron is also possible by using the Edge of a Table: Just pull it gently over the edge - over and over again and put your hands on top of the Depron piece while doing it. it will bend in the directiom of the table edge.

I hope you got me, my english language skills are not on point.

[Eurocub]

I'm about to build my first Depron plane and this gave me some good pointers - thanks

[thetruth]

grat video..LIKE.... please, is a 2mm thick depron slightly translucent or not ?

[rushdanrushil]

Is depron the type of foam which is kinda plasticy and sometimes used in packaging?

[crashtestrc]

Can I use hotglue ?? UHU glue seems to be pricey