Replace the Heat Sink | HP ENVY 17-cg0000 Laptop PC | HP

Learn how to remove and replace the heat sink for the HP ENVY 17-cg0000 Laptop PC.
Follow these steps to Learn how to remove and replace heat sink for the HP ENVY 17-cg0000 Laptop PC:
- Removal
- Before you begin: Remove the base enclosure and battery.
- In numerical order, remove the six P1 Phillips-head screws that secure the heat sink to the system board.
- NOTE: Due to the adhesive quality of the thermal grease and thermal pads located between the heat sink and processor components, it may be necessary to move the heat sink from side to side to detach it from the system board.
- Lift the heat sink off of the system board and remove.
- Replacement
- NOTE: Before replacing the heat sink, the thermal grease should be replaced. The thermal grease should be replaced every time the heat sink is removed.
- Use alcohol and a soft cloth, or an alcohol swab, to clean all thermal grease off of the heat sink, processor, and graphics processing unit.
- Use the thermal grease applicator to apply thermal grease to the processor and graphics processing unit.
- Place the heat sink into position on the system board.
- In numerical order, replace the six P1 Phillips-head screws that secure the heat sink to the system board.

Caution: Improperly installing or replacing parts could damage your HP device or void your warranty. Before replacing any parts, check your warranty.

Continue the Conversation:

#HPSupport #HPComputerService #HPenvyLaptop #HP

About HP:
HP Inc. creates technology that makes life better for everyone everywhere - every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:

This video was produced by HP.

[shrimpbynightbythomas]

Do you need to replace the thermal pads? If so, how thick is the thermal pads?