IOT Based ESP RainMaker Home Automation | ESP32 RainMaker

Today, I will show you how to make an iot Based home automation project using IR Remote, Push buttons and ESP RainMaker. You can easily control all the devices using ESP RainMaker while you are connecting to the internet. If the internet connection is not available then you can still control your home appliances using Push Buttons and IR remote control. The status of the relays are stored in the EEPROM memory. So if the module is reset due to power failure then the latest status of the relays will reload automatically when the power comes again. You can monitor the Realtime status update of your lights, in the ESP RainMaker App. You can use this IOT Based ESP RainMaker Home Automation Project to control you home from anywhere in the world. You can also use the ESP32 RainMaker Project to control your home lights using TV Remote and Push Buttons.
If you want to add the voice control in this ESP RainMaker Home Automation project. Then you can add the Google Assistant and Amazon Alexa in the rain maker app from the settings. There is the built in support for Google Assistant and Amazon Alexa in the ESP RainMaker App.

Hardware Components:
4. IR Remote Control
5. Push Buttons - x4
6. Resistor 1K - x4
7. AC Bulbs with Holders
8. Breadboard
9. Jumper Wires

Required Software:
1. Arduino IDE
2. ESP32 Core Version 2.0.3
3. ezButton Library
4. IR Remote Library

--------------------------------------------------------------------------------------------------------------------
Useful Video Links
--------------------------------------------------------------------------------------------------------------------
New Blynk IOT Home Automation System with Security System

SIM800L Home Automation Project Using Arduino and Push Buttons

GSM Based Home Automation | Sim800L MIT App Inventor Relay Control

--------------------------------------------------------------------------------------------------------------------
Social Media Links
--------------------------------------------------------------------------------------------------------------------
GitHub:
YouTube:

--------------------------------------------------------------------------------------------------------------------
Download Code
--------------------------------------------------------------------------------------------------------------------

--------------------------------------------------------------------------------------------------------------------
Disclaimer
--------------------------------------------------------------------------------------------------------------------
Disclaimer: All videos are for educational purposes and use them wisely. Any video may have a slight mistake, please take decisions based on your research. This video is not forcing anything on you.

Warning: I will use High Voltages which if incorrectly or improperly used could result in serious injuries or death. So be careful of what you are doing because I will take no responsibility for any of your actions.

#EspRainMaker #ESP32 #IotHomeAutomation

[cesarsilvanoesilvia]

Hello Ahmad, congratulations on the video, the best I've ever seen, it works perfectly, I found this video and decided to do the tests, it's just for research, it helped me a lot, I keep turning the relays on and off, on several different networks and it works on any one, greetings, have much success, hugs, thank you.

[AAdnaanmtl]

excellent project sir. Sir Still I am waiting for your 4 in 1 gsm project with eeprom . Thanks for sharing

[alaoui]

Thanks for the project Ahmed, it will be useful to explain the sketch in your next videos

[yaeeen-]

Esp 32 module stable with 5 v or 3.6 v ?
The resisstors important to connect with esp bord

[PriyankaKumari-mkpm]

Nice project
Bro ise kitna dur se control kar sakte hai please tell me 🙏🙏🙏🙏🙏

[mansurbhamani]

Great video. Have you tried momentary operation of the relay just like a door bell? Touch to ON and release to OFF. A code guide for one relay will be helpful.

[Luismaia]

Very good video however when the esp go online some relar go on by it self alternating each one .

[yazadtafti]

so we cna use arduino code without the arduino? i am a bit confused

[sometimeelectronics]

Aoa!
Why I use esp32 replace with nodemcu8266 for this project same step follows to node why its ok mathode for this project to node MCU 8266 what ur idea.?

[rirsxlj]

hi Ahmad i have a question about finding RMaker library. i can't find it could you please add a link in the discretion?

[babahaiderzaman]

If GSM sim800l is continuously blinking and not connecting to network. What will be the solution.

[shakerileiwat]

Amazing👍👍👍
Love it

Is Rainmaker cloud free??

[arbaaz]

how to switch between normal 230v connection & wifi

[m.shayanshamim]

Sir can we use touch sensor instead of push button or switch ?

[ameenenterprise]

I want to drive a stepper motor on the seat which can move forward and backward and with nodemcu if you can help please

[pqrst]

How can i create same project for 8 relay module any reference please share

[contalivreemaberto]

Excellent very educational video.
Could you please make another one with the thermostat function.
With DS18B20 and also with DHT11
I thank you in advance

[SaravananS-dvzj]

rainmaker doesn't show up in my partition scheme. what should i do!?

[Max-tycj]

Hi ahmad i have a suggestion about the time out in the rfid attendance. First scan will display the time in a log in column. When that card is scanned again, the time wil be display in a log out column in the google sheet

[mehdikarimpoor]

Hello good time
I program with esp32 in ThonnyIDE environment.
When I upload and run the code, to continue coding, when I hit the stop button and ctrl C, the code and repl environment does not open for me, and there is no way to install the firmware on the board again.
What is the method for this problem? Does using the Visual Studio Code environment solve this problem?