Homemade DOUBLE Lawn MOWER !?

In this video we do an unusual project (experiment)!
We combine two mowers into one big one! Enjoy!
IF YOU DO THIS PROJECT, DO IT AT YOUR OWN RISK!
.
.
Photo equipment
-SONY A7III
-SONY 18-70
-SONY 18-200
-2x Nikon d3200
-Nikor 18-55
-DJI Ronin SC
-RODE
-RODE NT-USB
-GoPro 7 silver
.

[kelleysimonds]

The output out the mower that feeds into the second deck fights the outflow of the second deck. This will cause it to plug rapidly in wet grass snd generally make for a clumpy cut.

[RodSwansmad]

Let’s all appreciate how organised his garage is 🔧 🔨 ✏️📐🪚⚙️🗜️

[NikoBernardić]

Kul ideja ja bih to napravio da imam ravne površine i da nije usko.Svaka čast na ideji i šteta što kosilice nemaju pogon❤❤

[geocvtron]

Congratulations, you just invented Siamese lawn mowers 😁🤩👍

[DavidFerree]

When I bought my place with five acres it took me two days to mow with my 42" riding mower. So I bought two 22" push mowers and connected them 36" apart from each other. I removed the front wheels and added a large caster wheel in front of each one, and towed the whole thing behind the riding mower with an aluminum bar a-frame. That gave me over 6' of mowing for less than $2000 total investment. I have a tractor and brush cutter now that I use for the big areas and a big zero turn for the yards, but the tow behind contraption was more fun. I'll post a short video of it in operation to my channel.

[k.springer]

This is once again one of the ideas / projects I love your channel for. The way you built this special mower could not have been done better, I especially like the two wheels in the middle, what a good idea.

[ThomasSmith-fzwq]

I can see putting the lawnmowers inline front to back. The front mower would be up higher for tall grass and the back mower would be lower for a finish cut.

[terryleblanc]

Nice .. But turn it around 180 so discharge is on both sides for excavator mount

[Barrett_Fodder]

We used to do this for tow behind finish mowers, but we used 3 so there was a couple of inches of overlap where they all met in a type of triangular shape. We used the bolt holes from the rear corners of the front mower to the front interior corner of the 2 trailing mowers (one of the trailing mowers was turned backwards to keep the discharge port open). We left all of the remaining wheels in place and used some angle iron to fashion a tow bar with a pin hitch for the atv or lawn tractor. It was a simple, reliable, 60" cutting finish mower that we used for many years and cost less than $100 years go.

[johnsomerset]

Great idea and well made. The only way to improve it would be to use sell propelled mowers and put a seat on the back. You could leave the separate drives systems independent, so that you could use them to steer with!

[armchairobserver]

NICE. I had to see how you solved the gap between blades

[whatnext]

Great job, I use $1 spring loaded clamps instead of zip ties.

[emre]

Hey man, why did you stop the BMW pickup project?

[WalterKnox]

Good old Briggs Flathead engines. Those things would run forever with basic maintenance. It is crazy to think that less than a decade ago, they were still making those bulletproof engines, and now the ones they make are worse than some of the no-name Chinese engines.
The saying "they don't make them like they used to" is true, but in some cases like this, you really don't have to look back too far.

[upholsteredhero]

Very clean combination, If anyone else is considering this it might be faster to simply mount them unaltered side by side in a sort of staircase shape. with one mower 1 step forwards. This would allow for an overlap in cut path, you may also have to flip one mower around so that each mowers exhaust port faces out.

[eddiewebb]

That is cool, you did a great job and you can build your leg muscles up pushing two mowers.

[joshuaryanferguson]

you need to make the blades closer like a timed deck so you won't have a middle strip

[JulioCochrane-lqpo]

👍🏻😁🤘awesome buddy hello from Venezuela 🇻🇪

[jimmyking]

Now he needs to make a three push mower❤❤❤❤❤

[Drcraigfreeman]

This would be a good idea IF you could make the two blades counter rotating to each other with opposing chutes