Best Change over Switch 1 Power Source 2 Loads Van Conversion. Check it out.

In this video, I go over how I wired this Rotary Cam Chang Over Switch to fit my needs in my van conversion.

[CaptainPeneus]

Brilliant. I am running input from solar to charge batteries in 2 separate areas. No more swapping alligator clips. Simple explanation and a good video. Cheers

[Denniejones]

Thank you soooo much for showing the entire wiring. Others stopped short of what I needed to see. lol. Great instructions!

[enochhutchcraft]

EXCELLENT!! I used it "backwards" like another reader already suggested. I wired it exactly as you indicated, your slight mis-spoken "load" wires actually helped with clarity in my application. I have two inverters I wanted to be able to toggle between. Simply excellent info for the DIY guy.

[smilinsunsmilinsun]

Thank you so much for this video, I was stranded on installation location until I bumbed into this video. You are doing a good job, keep going man.

[retireddeloach]

OMG so glad I found this video. I have been searching for days on how to wire these suckers. Our AC selector switch burned up. 30 amp RV has a 20 amp AC in the front and another one in the back. They can not run at the same time on campground power. Could not find instructions anywhere. I followed your method and the switch, the front and back ACs work perfectly. Can NOT thank you enough.

[aaronkaklamanos]

This is first one of these Rotory switch videos that I can actually relate too! Thank you so much!!!! Regards Aaron

[andreVEBK]

Perfect! The only detailed description I’ve found on YouTube! Thank you very much.

[Pk_Garage]

Thanks for this detailed video. I was trying to figure out how to wire this same switch. I'm using two of these, with two transfer switches, to switch between two power sources.

[paratyshow]

Tks this was exactly what I was searching for, clear concise video.

[MNCasaPro]

Thanks. I am building a hotbox to keep caulk warm in my van. I plan on switching between cigarette lighter inverter and an inverter running off a power tool battery (for when the van isn't running) Didn't know if this switch would work for me, but now I do. :)

[douglascharles]

excellent and thorough demonstration. Thanks

[KaminielLepan]

Thanks for the video... Very informative...👍👍👍

[John-xvno]

Thanks for the vid, I want to switch between a small welder and compresser.

[goinmobile]

Marck really appreciated your vid on wiring this switch. I have a similar switch with 8 terminals and 3 positions. I want to wire 2 power sources and 1 load allowing me to switch between power sources (Shore and Genset). How would I accomplish this with my switch? I haven't seen any other instruction on this.

[Salsadepr]

Hi Marck, I like your video. I am looking to buy the same exact transfer switch. I kind of understand were you coming from when tranferring from shore to Battery charger. But what about having the same shore line to be use for a reseptical when the shore is not in use. Can the tranffer switch be use to connect AC line Out and Shore Line In? I kind of did a Diagram to show my idea for better understanding. I like to do this for my owe purpose and I like to submitted to you, if you like. I'm a new beginner at this. Please let me know.

[richardchandler]

I did this exact switch and it lasted about 3 months. Fell apart inside. Have not tried to source a better one.

[petegaskell]

Feels like you’ve come up with a solution where there was no problem? If you have the battery charger connected to consumer unit you could use the switch to then select between ac & dc which seem more preferable. If you wanted to turn battery charger off you could just do so with the socket switch. Sorry I may be being stupid here but just can’t figure what this is achieving?

[CasaNova-uj]

Hi,
Thank you for the video. My issue is a bit different.
I would like to use the switch for changing the sens of rotation of an electric motor.
So that if on position 1 it will rotate in one direction and if on position 2 it rotate in the other direction.
Can you please help know how to connect the terminals? I mean which numbers of terminals I may connect together for position 1, and which ones for position 2. And which ones to connect to the motor and to the power supply.

[vajiraliyanage]

Nice.. but what if i wanted 2nd position to power Both ac and the charger.. then how to proceed

[peTeMelster]

Where did you get that square grey cover in between the two black parts of the Peissy switch?