Single Phase Automatic Transfer Switch (ATS)

preview_player
Показать описание
#ats
#electrical
#electricity
Рекомендации по теме
Комментарии
Автор

Now do this in 10 milliseconds. That’s where we are right now.

andregenter
Автор

I've created one of this using 3 5A SPDT relay for auto and manual switching and another 2 30A SPDT relays for main power switching (you can replace it with higher current), faster switching than this one and no switching delay. I've never tried using mosfets on creating this circuit, maybe I'll try sometime

paoloedullan
Автор

I think it should be more usefull to show what happens when the solar power is dissapearing or when its producing power, since thats the most realistic scenario.

florinbaciu
Автор

Even both source are simultaneously energized! Wow!

RolieVerSinganon-eslr
Автор

best is to use relay . Relays are fast and less breakdown compare to this moving switch

ziakhan-wrgs
Автор

Wouldnt you want this the other way around so it uses solar power whenever possible since you’re paying for the grid but not the solar?

Joshinken
Автор

That's nice to see a small one...The ones they were installing on that shopping centre that I was working on last year were huge..the size of an under counter fridge....and they were single phase 32 amps....
I see on the writing that these are 63 amps...
Is there a link to supplier?

roystevenson
Автор

Me encantan todos estos vídeos de electricidad

xevwuix
Автор

U can keep it between ongrid & ofgrid inverter to make it hybrid

masrurahmed
Автор

VERY GOOD, VERY LIKE
VERY THANKS YOU

ushwedone
Автор

automatic double pole double throw switch...neat

basiliobastardo
Автор

Chuyển điện quá nhanh có thể gây hỏng thiết bị điện tử, cài thời gian chuyển 5-10s

tiendx
Автор

It's good. But not fast enough to keep computers on

SetchiPaunda
Автор

Intha video va share panna yenga Rajagopal sir saarbaaga vaalthukal 🤝✌️

the_rizzless_rizzer
Автор

Нажмите на фрагмент, чтобы вставить его в текстовое поле.🎉

ugdnnxx
Автор

Way too slow! It has to switch over in a few milliseconds. That's why the high current relay is used. As soon as commercial power fails, the relay switches to the standby power - CLICK!

BTW If the switchover is too slow (like this is), it lets the HVAC compressor come to a stop. When power is then applied, the pressure prevents the compressor from restarting - the compressor will lockup and overheat, causing it to trip. Enough times and it can damage the HVAC.

acmefixer
Автор

आपकी वजेसे मेरा काम हो जाता है थँक्स ब्रो

sandeeprajput-qyxh
Автор

The problem with those mini brakers is that if you have let say a 60amp Main in the panel, you will need at least a #6 wire and those mini dont grab that strong the wire because of cheap plastic..

francisvazquez
Автор

Well... most offgrid and hybrid inverters have build-in an ATS capable of 10ms switch time.

MrRaddoslaw
Автор

This is only applicable for a standby generator. Typical solar is grid following and doesn’t transition with a switch

michaelbee