Honda V6 and Acura V6 THERMOSTAT Replacement

preview_player
Показать описание
Thermostat replacement at home for Honda and Acura V6 engines. Parts and tools listed below.



►►► OTHER VIDEOS THAT MAY INTEREST YOU***
--- Wheel bearing replacement with basic hand tools:
--- Choosing the best oil filter: Wix XP / Amsoil / Royal Purple..
--- Touch Screen car radio install:

This video will be very helpful for thermostat replacement for the following vehicles:
Honda Accord v6 thermostat
Honda Crosstour thermostat
Honda Odyssey thermostat
Honda Pilot thermostat
Honda Ridgeline thermostat
Acura MDX Thermostat
Acura TL Thermostat
Acura RL Thermostat
Acura ZDX Thermostat

Chapters:
0:00 - Intro
:19 - Removing radiator hoses
:56 - Removing a stuck radiator hose
1:46 - Having the right tools
2:07 - Removing thermostat housing & thermostat
2:42 - Cleaning thermostat housing
3:10 - How to install thermostat
3:56 - Reinstalling radiator hoses
4:08 - Bleeding cooling system
5:32 - Checking for leaks and wrap up

Note:
Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. Carsntoys is a member of the Amazon Influencer Program.

Publication, reproduction or distribution of this film is strictly prohibited.

Carsntoys

#thermostat #diyautorepair
Рекомендации по теме
Комментарии
Автор

Thanks dude! Ik these were super easy!

mikepicar
Автор

1:15 needs silicon spray only. The listed choice will eat @ a rubber hose and should be used on metal objects vs rubber

djay
Автор

Great video. Very insightful and informative. Thanks for sharing.

dlowe
Автор

How much Anifreeze did u use to refill it

johngarcia
Автор

Father figure like information, thanks 🦾

jeffreyswasey
Автор

You forgot to turn the heater on and to fill the reservoir.

mazarnelli
Автор

I bought the exact same thermostat from rock auto.
I noticed in the video that you did not use the new gasket that came with the new thermostat. I also could not use the new gasket because it is the wrong gasket. There is not a small notch at the top of the new one to fit into the house correctly . I had to use the old gasket just like you did.

jm
Автор

i just had to replace my thermostat.. in the video he used a 10mm wrench, i used a long socket and it worked better for me if anyone has trouble with it

dancurtis_
Автор

My wife's car is a 2005 Honda Accord V6, is this the same scenario?

toolman
Автор

Do u have to bleed the system after installing thermostat or also heater control valve

GuzmanJornan
Автор

Will the bad thermostat cause the fan to not turn on?

fernandosuniverse
Автор

My housing is stuck. How hard can I wrap in it to crack it loose? (don't wanna crack the housing(

jimdaniels
Автор

This video did not work for my 08 Accord V6. Throttle body needs to come off, there’s no way to get the rear housing bolt out without removing parts. I have little mechanical knowledge so now the car is going to our shop. Be careful trying this if you aren’t experienced.

Kingsammich
Автор

Those needle nose pliers that are bent funny those are spark plug wire pliers they’re not for hose clamps but if they work use them lol. ✝️✝️✝️🇺🇸

loveofchrist
Автор

Great video brother God bless you and your family and friends don’t forget Jesus Christ is coming back very soon so remember to repent and accept our Lord and Savior Jesus Christ into your heart. ✝️✝️✝️🇺🇸

loveofchrist