Eachine Tyro99 DIY Version Part 6 : Connecting USB Betaflight Configuration, Testing & Finishing

Показать описание

Eachine Tyro99 210mm DIY Version FPV Racing RC Drone w/ F4 OSD 30A BLHeli_S 700TVL Camera 5.8G 40CH 600mW VTX

Note:
1. This is the DIY version that comes unassembled.
2. Make sure the antenna is installed at the output end before powering up to avoid damaging internal components;
3. Note that the input voltage is within the specified range and is correct and correct to avoid damaging internal components;
4. If the antenna is replaced, select a standing wave and a gain antenna for a longer transmission distance;
5. Pay attention to classic protection during transportation and installation.

Package included:
1 x 210mm frame kit
2 x 2206 2150KV brushless motor CW
2 x 2206 2150KV brushless motor CCW
1 x 4 IN 1 30A BLHeli_S ESC
1 x Customized F4 flight controller
1 x 700TVL CMOS camera
1 x 5.8G 40CH 0mw/25mw/200mw/600mw switchable VTX
2 x Battery strap
10 x Racerstar 5038 2 blade propeller CW
10 x Racerstar 5038 2 blade propeller CCW

Pros (Good)
- Cheap
- Thick arm 5mm
- Very easy & steady fly

Cons (Bad)
- VTX mounting is visible

This video was captured with :
- Samsung Galaxy J5 Prime 2016

This video was produced and edited with :
- Windows Movie Maker Version 2012

Music License
"Sunspots" by Jeremy Blake

PLEASE SUBSCRIBE AND THANK YOU FOR WATCHING.

-~-~~-~~~-~~-~-
Please watch: "Unboxing Reptile CLOUD-149 149mm 3inch 4S 20A PNP FPV Racing Drone"
-~-~~-~~~-~~-~-