Eachine Tyro99 DIY Part 2 : Assemble Frame, Flight Controller & Motors

Please remember to put in the heat shrink into each arm before lock in the frame screw. The heat shrink is to be use later on to managed the motor cable to ESC. You can use electric PVC tape also.

Note:
1. This is the DIY version that comes unassembled.
2. Make sure the antenna is installed at the output end before powering up to avoid damaging internal components;
3. Note that the input voltage is within the specified range and is correct and correct to avoid damaging internal components;
4. If the antenna is replaced, select a standing wave and a gain antenna for a longer transmission distance;
5. Pay attention to classic protection during transportation and installation.

Package included:
1 x 210mm frame kit
2 x 2206 2150KV brushless motor CW
2 x 2206 2150KV brushless motor CCW
1 x 4 IN 1 30A BLHeli_S ESC
1 x Customized F4 flight controller
1 x 700TVL CMOS camera
1 x 5.8G 40CH 0mw/25mw/200mw/600mw switchable VTX
2 x Battery strap
10 x Racerstar 5038 2 blade propeller CW
10 x Racerstar 5038 2 blade propeller CCW

This video was captured with :
- Samsung Galaxy J5 Prime 2016

This video was produced and edited with :
- Windows Movie Maker Version 2012

Music License
"Sunspots" by Jeremy Blake

PLEASE SUBSCRIBE OUR YOUTUBE CHANNEL AND THANK YOU FOR WATCHING.

GIJO STUDIO EQUIPMENTS & GEARS

SYSTEM
- Acer Aspire E5-432 Notebook
- Desktop PC Intel Pentium CPU G3260 @ 3.30GHz, 4GB RAM, RADEON X550
- DELL SP1908FP 19” LCD Monitor (Display 1)
- DELL SE197FP 19” LCD Monitor (Display 2)
- SONY BRAVIA KDL-43W800C 43” Android Smart TV (Display 3)
- Artillery SideWinder X1 3D Printer
- V8S Live Stream Audio Interface With Bluetooth
- Panasonic EM-2800A Super Uni Directional Microphone
- Roland Micro Cube GX Power Amplifier Speaker
- Peavey Audition 110 Transtube Power Amplifier Speaker
- Zoom G1XN Ext Guitar Effects Pedal

CAMERA

RC FPV (First Person View)

GAMING
- Logitech F710 Wireless Gamepad

#malaysia #dronecamera #racingsimulator #cny2020 #dronefootage #dronefails #gadgets2020 #kotakinabalusabah #rcplane #rctrucks #fpvdronecinematic #fpvdronebuild

-~-~~-~~~-~~-~-
Please watch: "Unboxing Reptile CLOUD-149 149mm 3inch 4S 20A PNP FPV Racing Drone"
-~-~~-~~~-~~-~-

[recklessndalycity]

you know what im grateful for your video but after following your lead I had to start all over again because you didnt put the heat shrink on the arms. almost a complete waste of my time.

[recklessndalycity]

it sucked because im at the part where we put the motors on before realizing you did not put heat shrink on the arms thats like the end of the video. i know you went back and started over with the damn heat shrink. you could have said something at least