Clio 172 182 Dogbone Powerflex Mount Bushing Replacement Guide

preview_player
Показать описание
Рекомендации по теме
Комментарии
Автор

Powerflex kitPff60-211k will fit into febi 29502 engine dogbone! So this means it will fit a lot of Renaults. My 2001 Clio from 2001 has this setup now. The dogbone from a Twingo from arround 2011 fits on my Clio. And the powerflex kit fits the Twingo dogbone. Drives great now!

adn
Автор

Why do people always feel the need to add music over the commentary?

CoolTimes
Автор

Does the bush not need to compressed a certain amount before fitting the nut back on? Or is the bolt long enough to get the nut on then tighten?

Motivatorteo
Автор

80’s game show music was not needed.
Thanks for the guide thouhh

mjbt
Автор

After that modification did you have a any vibrations at idle rpm on the steering wheel??

poulios
Автор

I've heard that the bush on the smaller side of the dogbone should be fitted with the thicker part down. This will solve heavy vibrations. So the other way around compared to how the guy in this video does it. May help some people.

jochimberkhout
Автор

By the way, there is a difference in dogbone for Clio 172 Ph1 and 172 Ph2/182. Older dogbone ir smaller and screws are parallel. I found out that the hard way.

janisvaskevics
Автор

dogbone from clio ii mk2 phase 2 are the same ? Correct ?

poulios
Автор

terrible wobble on car can it be gearbox

jackiesage