FAST & EASY way to Mount RC4WD Stamped wheels

preview_player
Показать описание
This is the way I mounted my RC4WD Deep Dish Wheels on some Hyrax Tires, hear a lot of people have issues with these trying to squeeze them all around or use long screws, try This. if your tires fight you to get seated use a little lube on the wheel not the rubber.
Рекомендации по теме
Комментарии
Автор

I bend a paperclip into a U shape and put it through the holes to keep them lined up and it works great!

kennyaustin
Автор

100% helped me, i put the deep side in first and it wouldnt work.

thank you

M-F-CORGI
Автор

Okay now it's my turn to tell you how to do this right take your two sides of the wheel and put a little Mark on the wheels after you line them up before putting them on the tires then after you get them together take two small Allen wrenches and run throw lug nut holes togeth er they automatically will line up together . Lining up your wheel holes and star pattern before putting them in the tires is easy you can use a little piece of tape or anything just to Mark the proper location of how they line up it's very simple I Mark with magic marker on the very top of the wheel and then when you put them together it doesn't show but tape works good put it on the inside of the wheel front and back after properly lining up all holes and star pattern

popwall
Автор

Thanks for the video. I have a set ordered for my Trx4. Looks like the hardest part is lining up the rim halves. Maybe try pre fitting before mounting the tire and marking a single lug hole on each half with a water paint marker or some other temp marking to help with the initial line up when the tire is mounted. Would shave a few minutes off each wheel in my opinion. Surely the wheel halves are easier to line up without the tire.

timothybrown
Автор

Will those rims work with stock tires from a Redcat gen 7, I ask cause I have the same rims but the stock tires, the bead keeps popping out when I tighten all five screws.

bobfidguello
Автор

I bought rims from SSD and the screws are too short. What a waste of money.

David-hhnc
Автор

Easy fast way just showing how hard they are haha

stuartharvey