RYOBI ONE+ HP 18V Brushless Compact Cut-Off Tool Review Model # PSBCS02B | Ridgid SubCompact ????

---------------------------------------
RYOBI ONE+ HP 18V Compact Brushless Cut-Off Tool produces up to 19,500 RPM that will cut through materials like metal, plastic, tile, cement board, drywall, wire shelving, PVC and vinyl siding. The RYOBI ONE+ HP 18V Compact Brushless Cut-Off Tool is compact and lightweight ideal for one-handed operation and cutting in tight spaces. The tool has two LED lights that illuminate both forward and reverse cutting directions, making it easier to see in dark spaces and also should double as an informational interface to let you know what is happening with the tool.

Specs:
- Dual LED lights before the blade and on the foot of the shoe
- Brushless motor
- Forward/reverse cutting
- Supports 3-inch wheels
- Speed (max): 19,500 RPM
- Arbor: 3/8-inch (also includes 5/8-inch flange)
- Adjustable guard
- Wire base for stability
- Onboard blade wrench storage
- Compact 8.5″ size
- Price: $99 (bare tool)
- Includes: Cut-off Tool, Metal Cut-off Wheel, Carbide Abrasive Blade, Diamond Tile Blade, Hex Key, and Operator’s Manual.

#Ryobi #Tools #RyobiNation

[Pablo-oihv]

You should have the wheel spinning before you make contact. Thats why its hanging up

[jerelsalazar]

What dad always said, "A tool's only as good as you are."

[fiouable]

So basically, you’re not experienced to review this tool. And you demonstrate it masterfully.

[hmong_keeb_kwm]

As a ryobi user i have been demanding for one. They finally made one :)

[jeffcoronado]

I've been a milwaukee man for years.but my wife bought me the ryobi brushless drill and impact and I gotcto admit im impressed

[rcmikeklein]

love this little tool! it's intended to be a support tool for the heavy primary tool that's doing most of the work so if you're at the top of a ladder and need to trim a notch off a piece vinyl siding than this is the tool but don't expect to make all your cuts with this tool.

[baristagirl]

Thank you for such a comprehensive review. We have one of these and love it. It's been a real workhorse. It is very dusty when used for drywall but for cutting other materials has been very handy, especially for cutting in where other larger tools don't quite fit. I wanted to see how it did on tile because I plan to use it for some backsplash tile. Thank you again!

[imcubanbe]

I LOVEEEE my 3-inch cut off saw. Good lord that thing is soooo useful. I used it to cut soooo many things such as: Drywall, Wood, Vinyl plank flooring (LVP), some metals, screws, some metals. This is an extremely versatile 3-inch monster.

[AngryOtter]

I love mine. For when you need to cut a piece of trim or moulding, drywall or a screw or nail. It's made the cut off wheels on my rotary tools unnecessary and its much easier for me than using a angle grinder or circular saw for a simple task. To me its a great convenience tool, if you treat it as such, you will appreciate it.

[philparrish]

Read the instructions. You must keep the trigger pressed when a fault occurs in order to see the flashing code. When you release the trigger the light stops coding.

[tracy]

Used this for cutting through plaster. I love it.

[marsoelflaco]

Get the tool running/spinning first then start the cutting. That will prevent the "binding" he's experiencing.
You'd think he'd know that.

[donaldmitchell]

I have a bunch of RYOBI tools, I like them .

[tobaccojohn]

I bought the Ridgid sub compact cutting tool, mine also stops with the smaller batteries. Bought the larger batteries and no problems. I use the Ryobi and Avanti cutting wheels.

[haroldbrown]

should you be using a 3.0 amp or larger battery for less issues?

[sabiefreddy]

Drywall blade does kick out a lot of dust while cutting dry wall.. not sure if it’s the style of the blade

[kramregnu]

The metal guide left marks on my tile. Other than that it cut tile (on the wall) just great! Very dusty so I also bought the 4" wet/dry saw to combat dust.

[zachfox]

You're using the tool wrong, that's why it's stopping so often. Start the spin before you make contact. Your angle of approach is also important. Come more parallel to the cutting surface and move along it, as opposed to pushing down into it.

[stevejones]

I used it to cut the plastic tube, it cut it well, but it stopped once which required removing blade and put it back after CLEANING.

Also noticed that lock got lose & started making noises. Overall I like it.

[ViperJoeB]

Great review. I see a few battery comments. Its hard to tell what type of battery you are using. I haven't been able to confirm 100 % but I believe you need a Lithium +HP battery in lieu of standard Lithium battery to get full electronic functionality from any One +HP compatible tool.