HUBSAN H109s UPGRADE

preview_player
Показать описание


  1. honza hanes
Рекомендации по теме
HUBSAN H109s UPGRADE 0:01:03

HUBSAN H109s UPGRADE

Hubsan X4 H109S 0:08:50

Hubsan X4 H109S Firmware Update (From Banggood)

Hubsan x4 pro 0:22:00

Hubsan x4 pro h109s Gps upgrade / fix

Hubsan X4 Pro 0:13:06

Hubsan X4 Pro H109S Upgrade Master Airscrew Props

HUBSAN H109S RX 0:02:02

HUBSAN H109S RX UPDATE FOR GREATER CAMERA ANGLES

Drone Speed Controller 0:05:25

Drone Speed Controller Repair + Test Flight | Hubsan x4 Pro H109s

Hubsan X4 Pro 0:07:41

Hubsan X4 Pro H109S drone Calibration

Hubsan H109S Pro 0:04:08

Hubsan H109S Pro new RX update Full axis gimbal camera face down 90 degrees

Hubsan h109s motor 0:11:04

Hubsan h109s motor mounts made better

HUBSAN H109S GIMBAL 0:01:10

HUBSAN H109S GIMBAL NEW FIRMWARE, CAMERA CAN GO STRAIGHT DOWN NOW.

HUBSAN H109S - 0:08:03

HUBSAN H109S - EXPERIMENTAL FIRMWARE - OSD - BONUS FOOTAGE :)

HUBSAN H109S (EXPERIMENTAL) 0:05:52

HUBSAN H109S (EXPERIMENTAL) FIRMWARE - OSD - FPV TESTING.

Hubsan h109s pcb 0:43:34

Hubsan h109s pcb Replacement

Using the Hubsan 0:07:30

Using the Hubsan H109s high end H7000 transmitter tutorial.

Hubsan X4 Pro 0:16:41

Hubsan X4 Pro h109s back pack & Quad Mod Update

Hubsan H109S X4 0:07:00

Hubsan H109S X4 PRO über Wind Turbine

Hubsan h109s high 0:02:12

Hubsan h109s high edition transmitter

Hubsan h109s pro 0:00:13

Hubsan h109s pro

HUBSAN H109S HIGH 0:02:22

HUBSAN H109S HIGH EDITION BINDING METHOD

Hubsan X4 Pro 0:00:32

Hubsan X4 Pro H109S PARAMETER EDITOR REVIEW TEST GREAT

H501SS Upgrade Tutorial 0:30:11

H501SS Upgrade Tutorial

Hubsan H109S X4 0:00:08

Hubsan H109S X4 DEAL?

Hubsan X4 Pro 0:22:06

Hubsan X4 Pro H109s AFTER UPDATE

Hubsan x4 pro 0:00:15

Hubsan x4 pro H109s vole statio avec gps et sans les mains

Комментарии
Автор

Thank you for the H109s video. I have the same quad with the same gimbal and I'd be very interested to learn about your connections. There is a brief clip in your video of the plug on the bottom of your quad but I can't really tell what is going on.
I wondered if you know what the pinouts of this plug are and I also wondered if you could do a video with more detail of your gimbal setup. 
I would like to change the camera for a Hawkeye 8SE if I can figure out the wiring.
Thank you
Jon

dymarke
Автор

Also I can't see how to get the two front corners of the shell apart if you have any pointers I'd appreciate it.
Thank you
Jon

dymarke
Автор

I see you have the standard/low edition H109s. Can you do waypoints with it using the H7000? The Hubsan FB page says you can't. Also, what firmware do you have on the H109S? TIA for the info.

dhoser
Автор

Can you use the X Hubsan app with these mods? Would be nice to do waypoints.

dhoser
Автор

Have you noticed any difference by adding the heat sinks? I put these on mine and also on my H501S but can't really tell if they make a difference or not.

dhoser
Автор

A very useful and informative video! The links are especially helpful.
I recently crashed my H109 into a tree and burned out three ESCs and a bent the shafts on a couple of motors. I shall certainly add heatsinks to all chips when the replacements arrive from China.
The antenna stuff is also very interesting but I'd take a look at Bruce Simpson's videos if I were you.


Changing for higher gain antennae only changes the shape of the electromagnetic envelope. You don't really get any additional gain. Changing the shape of the envelope can cause problems making the system too directional. You may know this already so I hope I'm not causing offence. I have ordered some FatShark circular polarised antennae from Banggood. I'll see how these shape up.
The problem is with stuff ordered from China is that I think it is 'sent by donkey', a very old donkey... It takes ages and my good weather envelope is being eaten away. That's life in Scotland for you. I have subscribed and look forward to your future videos. Thanks. AgentBertram.

agentbertram