Idobao ID80 Bestype sound test! Decent build quality with poor gasket mount implementation...

This board cost $269. Although it can be categorized as a budget board, unfortunately the mounting implementation is very bad on this one.

So I got to make this sound pretty decent ( in my opinion.. ) with some weird mods. Instead of placing the gaskets on the chambers, I placed 4 of the bottom gaskets ( thicker one ) right beneath the PCB on top of the bottom case. I did this since the gaskets did pretty much nothing when installed in its normal placement. The main cause for the problem is the bottom case only have less than 1mm gap for the pcb and the plate to move, which is not enough.

I also loosen the screws to give some more space between the top and the bottom case.

Board : Idobao ID80 Bestype
Plate : PC
Switch : Durock L7 L+F ( alphas + mod ), T1 L+F on spacebar
Keycaps : Domikey SA Aurora
Gasket : 4 bottom gaskets placed right on the bottom case beneath the pcb
Foam : plate foam + PE foam

[gabrielebattistata]

So it's not worth the money, do you think that the id80 V2 is a better value compared to this board or the implementation of the mounting system is just not worth?