Sanding Wood Bowl Finish How To Sand Woodturning Video

Sanding Wood Bowl Finish How To Sand Woodturning Video
Sanding and wood finishings are very personal. In this video, I'll show you how I sand my wood bowls when I'm done turning on the lathe. Hopefully, you'll be able to learn my technique for sanding wood bowls and incorporate some specific tips to into your sanding routine.

_____________________

VISIT MY RECOMMENDED WOOD BOWL TURNING EQUIPMENT PAGE

_____________________

EQUIPMENT USED IN THIS VIDEO:

___________________

If you are curious about, or already completely addicted to turning wood bowls, check out my website dedicated to the art and craft of turning wood bowls!

____________________

_____________________________________________________________

_____________________________________________________________

FREE WOOD BOWL TURNING TIPS EMAILED EACH WEEK – Sign Up Free
_____________________________________________________________

*** TOOL SHARPENING FOR WOOD BOWL TURNING – ONLINE COURSE

_____________________________________________________________

*** WOOD BOWL TURNING Start-to-Finish – ONLINE COURSE
_____________________________________________________________
#woodturning
#woodworking
#turnawoodbowl

[wardscott]

Everyone skips the sanding in videos, and now I understand the issues I have been having. Thanks for another great video, and the best bowl turning channel out there.

[louk]

Super Helpful, explains why my sanding doesn’t quite hit the mark. Many thanks!

[ricktalerico]

Thank you! I am fairly new to turning and you are the first person who has really explained the sanding of a bowl.

[tommyschutz]

I think I finally learned some different techniques of sanding. I used to make pens and enjo the turning process, and then enjoyed the outcome. I like the fact of you teaching that I really don’t start sanding so much, until after I turn the outside, put a tenon on it, turn the bowl around in the chuck, make the bowl round again, THEN, sand the outside.

[JDDupuy]

You have motivated me to start turning bowls. I appreciate your videos and teaching.

[petermarsh]

Dear Kent, so that’s how you do it! Struggling with sandpaper running on a turning piece was only leaving scratches galore. I also now know what hardware to get to properly sand mt bowls. Thanks a million.

[earljtharp]

You have really good instructional videos. They are the best I have seen on YouTube. This sanding video is especially good. I wish I had seen your videos years ago.

[mpart_woodlathe-stuff]

Hmm, some new concepts to try. Thanks Kent🙏 Stay safe. -Mike😷

[archiehebron]

Very educational, sir. I will use this technique in the future to make my sanding and finishing more effective.

[dianayates]

Thank you Kent. This is such a helpful video.

[melvyndickson]

Very helpful video for me to review before I begin to use a power drill to improve my sanding.

[mrPauljacob]

Thank you for this. I turn alot of nice bowls and It takes a lot of sanding with just my hand and the lathe speed. Now I know why

[jefflynch]

Since I am very very new and the club I joined closed two months after my first meeting due to the “plandemic”; these videos are essential to me. Thank you !!!

[mat]

Hi! Greetings from Argentina. Isn't it necessary to rise the grain with water? Thanks!

[alansmith]

Thank you. You helped clear up issues I have had with scratches.

[PhilipSchabloski]

Great learning video as were can I find A sanding mandrill.?? I've looked all you much

[billgiles]

I’m pretty new to turning and finding that Donald Rumsfeld has it right. There are things I know that I know, there are things which I know I don’t know and there are things I don’t know I don’t know. This video filled in one of the last of these. Very educational and clearly explained in a direct and friendly manner.

[MauriceDay-tcwe]

I was able to work out the sander question? It's a Chicago close quarters drill, model 63119.

[MauriceDay-tcwe]

Hi Kent, I'm a new subscriber and would like to know the make and model of the sander you are using in the video? It's not the same sander you have in the description.

[BAILEYWOODWORKS]

Very helpful Kent! Every video I watch seems i am doing things wrong, but as I change my peices get better and better! Thanks for your teaching!