MY 7th CUSTOM 5' BUILD | 05−06−2024

MY 7th CUSTOM 5" BUILD | 05−06−2024

My 7th custom 5" build (6s configuration) - Seii-FPV
FPV components used in this build:
Frame: ImpulseRC Apex EVO 5"
Receiver: Radiomaster RP4TD Diversity TCXO ExpressLRS 2.4GHz Receiver
Video System: Walksnail Avatar HD v2
Motors: T-Motor Velox V3 2306 1750KV Motor (6s)
FC/ESC: Flywoo GOKU F722 PRO V2 50A BLS 30X30 Stack (MPU6000)
Buzzer: GEPRC Super Buzzer
LED: COB Light Strip, RED - 6S
Propellers: HQ J37 Juicy Prop

Maiden flight with my 7th custom built quad featured in this video:

Apex EVO 5" frame assembly video:

My TPU designs for Apex EVO 5" frame:

-----------------------

░░░ ░░░ My TPU designs for 𝙄𝙢𝙥𝙪𝙡𝙨𝙚𝙍𝘾 𝘼𝙥𝙚𝙭 𝙀𝙑𝙊 𝟱" 𝙛𝙧𝙖𝙢𝙚 ░░░ ░░░

3D printed parts can be seen here in this post:

3D models (STL files) are available below at the following links (I'll be adding new ones as I complete them):

- 𝙎𝙚𝙞𝙞-𝘼𝙥𝙚𝙭 𝙀𝙑𝙊 𝟱 𝘾𝙊𝘽 𝘼𝙧𝙢 𝙂𝙪𝙖𝙧𝙙
✩★✩ ✩★✩ ✩★✩ ✩★✩ ✩★✩ ✩★✩ ✩★✩★✩
(𝙄𝙈𝙋𝙊𝙍𝙏𝘼𝙉𝙏 𝙉𝙊𝙏𝙀: 𝘋𝘖 𝘕𝘖𝘛 𝘎𝘌𝘛 𝘵𝘩𝘪𝘴 𝘪𝘵𝘦𝘮 𝘪𝘯 𝘤𝘢𝘴𝘦 𝘺𝘰𝘶 𝘥𝘰𝘯'𝘵 𝘩𝘢𝘷𝘦 𝘊𝘖𝘉 𝘭𝘪𝘨𝘩𝘵𝘴 𝘪𝘯𝘴𝘵𝘢𝘭𝘭𝘦𝘥 𝘢𝘳𝘰𝘶𝘯𝘥 𝘵𝘩𝘦 𝘱𝘦𝘳𝘪𝘮𝘦𝘵𝘦𝘳 𝘰𝘧 𝘺𝘰𝘶𝘳 𝘤𝘢𝘳𝘣𝘰𝘯 𝘧𝘳𝘢𝘮𝘦. 𝘈𝘳𝘮 𝘨𝘶𝘢𝘳𝘥𝘴 𝘸𝘰𝘯'𝘵 𝘧𝘪𝘵 𝘴𝘯𝘶𝘨𝘭𝘺 𝘢𝘯𝘥 𝘵𝘩𝘦𝘳𝘦 𝘪𝘴 𝘢 𝘤𝘩𝘢𝘯𝘤𝘦 𝘵𝘩𝘦𝘺 𝘸𝘪𝘭𝘭 𝘧𝘢𝘭𝘭 𝘰𝘧𝘧. 𝘛𝘩𝘦𝘺 𝘢𝘳𝘦 𝘥𝘦𝘴𝘪𝘨𝘯𝘦𝘥 𝘸𝘪𝘵𝘩 𝘊𝘖𝘉 𝘭𝘪𝘨𝘩𝘵𝘴 𝘪𝘯 𝘮𝘪𝘯𝘥, 𝘢𝘯𝘥 𝘵𝘩𝘦𝘺 𝘧𝘪𝘵 𝘱𝘦𝘳𝘧𝘦𝘤𝘵𝘭𝘺 𝘰𝘯𝘭𝘺 𝘪𝘧 𝘊𝘖𝘉 𝘭𝘪𝘨𝘩𝘵𝘴 𝘴𝘵𝘳𝘪𝘱 𝘪𝘴 𝘪𝘯𝘴𝘵𝘢𝘭𝘭𝘦𝘥 𝘢𝘳𝘰𝘶𝘯𝘥 𝘺𝘰𝘶𝘳 𝘧𝘳𝘢𝘮𝘦. 𝘍𝘰𝘳 𝘧𝘳𝘢𝘮𝘦𝘴 𝘸𝘪𝘵𝘩𝘰𝘶𝘵 𝘊𝘖𝘉 𝘭𝘪𝘨𝘩𝘵𝘴, 𝘐 𝘩𝘢𝘷𝘦 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘭𝘪𝘴𝘵𝘪𝘯𝘨 𝘸𝘪𝘵𝘩 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘈𝘳𝘮 𝘎𝘶𝘢𝘳𝘥 𝘥𝘦𝘴𝘪𝘨𝘯.)
✩★✩ ✩★✩ ✩★✩ ✩★✩ ✩★✩ ✩★✩ ✩★✩★✩

- 𝙎𝙚𝙞𝙞-𝘼𝙥𝙚𝙭 𝙀𝙑𝙊 𝟱 𝙁𝙧𝙤𝙣𝙩 𝘽𝙪𝙢𝙥𝙚𝙧:

- 𝙎𝙚𝙞𝙞-𝘼𝙥𝙚𝙭 𝙀𝙑𝙊 𝟱 𝙂𝙤𝙋𝙧𝙤 𝘽𝙖𝙨𝙚:

- 𝙎𝙚𝙞𝙞-𝘼𝙥𝙚𝙭 𝙀𝙑𝙊 𝟱 𝙎𝙩𝙖𝙘𝙠 𝙂𝙪𝙖𝙧𝙙 / 𝙎𝙠𝙞𝙧𝙩:

- 𝙎𝙚𝙞𝙞-𝘼𝙥𝙚𝙭 𝙀𝙑𝙊 𝟱 𝙑𝙏𝙓 𝟯 𝘼𝙣𝙩𝙚𝙣𝙣𝙖 𝙈𝙤𝙪𝙣𝙩:

- 𝙎𝙚𝙞𝙞-𝘾𝙞𝙙𝙤𝙧𝙖 𝙎𝙇𝟱 𝙫𝟮.𝟭 𝙁𝙧𝙤𝙣𝙩 𝘽𝙪𝙢𝙥𝙚𝙧:

- 𝙎𝙚𝙞𝙞 𝙂𝙚𝙥𝙍𝘾 𝙈𝙆𝟱 𝙁𝙧𝙤𝙣𝙩 𝘽𝙪𝙢𝙥𝙚𝙧:

- 𝙎𝙚𝙞𝙞-𝙌𝘼𝙑-𝙎 𝙅𝙤𝙝𝙣𝙣𝙮𝙁𝙋𝙑 𝙎𝙥𝙚𝙘𝙞𝙖𝙡 𝙀𝙙𝙞𝙩𝙞𝙤𝙣 𝙁𝙧𝙤𝙣𝙩 𝘽𝙪𝙢𝙥𝙚𝙧:

- 𝙎𝙚𝙞𝙞-𝙎𝙤𝙪𝙧𝙘𝙚 𝙊𝙣𝙚 𝙫𝟱 𝙁𝙧𝙤𝙣𝙩 𝘽𝙪𝙢𝙥𝙚𝙧:

- 𝙎𝙚𝙞𝙞-𝙂𝙚𝙥𝙍𝘾_𝙈𝙆5_𝙎𝙩𝙖𝙘𝙠_𝙂𝙪𝙖𝙧𝙙𝙨_𝙫𝟮_𝙋𝙐𝘽𝙇𝙄𝘾:
░░░░░░░░░░░░░░░░░░░░░░░░░░░░

Sleeves for the motor wires - as answered under comment section in some of my other build videos, I purchase them either at Michaels stores here in Canada, or even Dollarama (if they have some nice ones). Walmart is a good source as well. Nothing special, simple paracord you can use. Simply pull out strings from inside, which will leave you with a nice sleeve for your motor wires. Burn the ends so it's not fraying, and you're good to go.

█▀▀▀ █▀▀▀ ░▀░ ░▀░ ░░ █▀▀▀ █▀▀█ ▀█░█▀
▀▀▀█ █▀▀▀ ▀█▀ ▀█▀ ▀▀ █▀▀▀ █▀▀▀ ░█▄█░
▀▀▀▀ ▀▀▀▀ ▀▀▀ ▀▀▀ ░░ ▀░░░ ▀░░░ ░░▀░░
Seii-FPV

[bobbyspenser]

All I can say is oh my gosh that is really looking nice an I like the aspect of the bull horns great job thank you for sharing it with me

[seangordonrichards]

That really does look like a sick build, well done

[BartManDude]

Man! I didn't know that it was going to be a build documentary🔥 No wonder it took you so long to edit, that's some real work.
You sure got a lot of love in the thumbs department so far, so I'm guessing people enjoyed it as much as I did. Great work Seii!
I've had to install my FC seemingly every direction possible lol. always a battle, and I'm always impressed when a whoop frame is designed with building in mind. Like my bee35, not my favorite whoop, but the frame was designed with every part in mind.
looking at all that room on the 5" though, doesn't seem to be quite as confined as the tiny whoops. I love the El Toro tpu, it's like a texas low rider ;)
So much attention to detail, that is what I absolutely love about your builds. Excellent solder balls as well! I love black and red, the leds look awesome! Looks like Cookie likes it too👍

[MysteryD]

Nice clean build. The tpu parts give it a nice flair. You're relatively new to building but clearly you take time and care to do it properly. Keep it up, the more you do the more you'll impress yourself. You'll learn over time, what works and what doesn't, and what you should have done differently.
Oh, and fantastic editing. And I like your accent lol.

[FATSNAIL-FPV]

Beautiful build!
Might consider this frame besides my LoFlo MikeX and Supafly Syncmode!
And: happy boss, happy dog. He was really sharing the good vibes!

[kevincrosby]

I love your video man. You have a good sense of humor then you get straight to business…. Where do you get the sleeves for the wires? A link would be very helpful. Thank you in advance. Can’t wait to see you fly this build.

[fireonplay]

I am not concentrate on your video because you voice is amazing. In a word totally masterpiece voice😊😊

[sosdeathvalley]

all i can say love your builds and dont have to break the bank in parts

[paulr]

Great video, but hotter soldering iron needed, solders looked dry as, aka not a nice shiny flowed bubble. I had same problem before. Especially for power of ESC.
Your motor wire solders were better, so get hotter iron for bigger wires is the trick.

[trumblez]

* me flying a quad held together by zip ties *

[KuraDrone]

Whow, he is so beautifull, and i miss this vidéo since 3 week 😭 I really like the begining, nice introduction 😆 And i understand why you waiting with impatience the FC and the ESC, it's a beautifull stack, it look like really sexy 😳. The music is also a good nice choice, calm and peace for a précision work. I am curious about the Walksnail Avatar HD v2, for me it's not compatible with the dji goggle V2, you change your google ? Well done for this beautifull build, your soldering look like very clean and as i see, he fly perfectly 😍 Hope see soon new vidéo ;)

[MysteryD]

You could save a bit of space by not using nylock nuts on the stack. Regular nuts will work fine (just dont use nylon)

[OrFPV]

Nice build, did you choose to run the xt60 cable over the esc like shown in the video ?

[Yanshuf]

Hey, thanks for the video! how would you compare the apex evo against the mark 5 frame?

[KabirRasikh]

where did you get those pink/blue braided sleeves from for your motor wires?

[seangordonrichards]

Hi Seii, can you please reply with the link to the COB LED strip you used on this build?

[tianctrl]

Great build! Your stack cover is custom? Would you mind sharing stl file? 😁

[paulr]

Flown it yet, or test hover ? I know only a day old video.

[MrTuwshe]

Hi Seii. Thx for sharing this great job. Can you share 3d files especially fc esc guard?

[NickNoHikariFPV]

Great video, what about front side lightning ? does it disturbing camera view?