American Standard Selectronic Flushometer | Piston | Repair and Replace

In this episode of Repair and Replace, Vance shows how to replace the piston in an American Standard Selectronic Flush Valve. This applies to both commercial toilets (water closets) and urinals.

More American Standard Flushometer repairs:

___________________________

00:00 Intro
00:21 What You'll Need
00:33 How it Works
01:39 Step 1: Shut Off the Water
01:58 Step 2: Remove the Sub-Assembly
02:28 Step 3: Replace the Piston
02:57 Step 4: Install the Sub-Assembly

___________________________

AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 - 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.

Connect with AMRE Supply

[andresmayen]

Hi, thanks for your video, i`m very happy because have subtitles in spanish, this is good for me. Thank u!

[ShiverPlumbingTN]

Thanks, big help repairing American Standard Flush Valves for 1st time!

[davidhunter]

will a malfunctioning piston create water hammer?

[maynardbumagat]

what would cause the urinals to not flush? the solenoid makes a click sound but does not flush... manual flush works

[valentinevega]

So i tightened the bonnet nut down on to the piston and once I started to open, valve, water begins to fill pipe . I push manual valve and water begins to make it past piston in solenoid housing .Bad manual valve ? Not tight enough on bonnet nut ? I checked solenoid and its good, makes a click noise . Help would be appreciated .

[michaelmunoz]

WHat are these part #s and where are they listed in your catalog

[shaikkareem]

Hi sir u have mor vdos please sand me please