American Standard Selectronic Flushometer | Installation | Repair and Replace

preview_player
Показать описание
In this episode of Repair and Replace, Vance shows how to install an American Standard Selectronic Flush Valve. This applies to both commercial toilets (water closets) and urinals.

More American Standard Flushometer repairs:

___________________________

00:00 Intro
00:20 What You'll Need
00:35 Step 1: Flushometer Rough In
01:51 Step 2: Install the Flushometer
02:37 Step 3: Activate The Sensor
03:11 Step 4: Test the Flushometer

___________________________

AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 - 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.

Connect with AMRE Supply
Рекомендации по теме
Комментарии
Автор

*Note* Teflon tape, or pipe joint compound is not to be used on any connection that uses an o-ring or gasket. It is however needed on the brass control stop adapter. This was not shown in the video but will still help provide a leak proof connection.

AmreSupply
Автор

How would i go about changing the sensor batteries thanks!?

zcarbajal
Автор

Hi AMRE is 10 bpm flow will American auto flush toilet valve

heinzvuong