JCB 3CX BEARING TRUNNION 1

JCB 3CX,JCB 3CX BEARING,JCB 3CX TRUNNION,JCB 3CX REPAIR,BEARING TAPER ROLLER

[guyburton]

Hi Ive worked for JCB for years and now self employed, He certainly made a mountain out of a mole hill removing the lower trunion bearing. Small thin wedges and a good drift and a good eye will draw these out equally every time.

[bradgifford]

I just did this on a 2000 JCB 520-50… you’ve done it all wrong… I too spent 6 hours with chisels and sledgehammers… you need to use the 4 bolts as Jack bolts and unscrew them 1/4” and put a plate against them and use a puller with chisels and a hammer… we probably had 30, 000 lbs of pressure on it… you can’t heat it as there are seals in there you’ll destroy

[reginaldoaparecidoadolfo]

Eu gostei muito da sua retaesecavadeira parabéns 👏 para você mesmo gostei muito da sua retaesecavadeira de verdade mesmo

[glennfryer]

Heating up the wrong part making it worse, should be gently heating up the main hub casting..

[tractoroca]

Muy buena aportación saludos desde Ecuador bendiciones

[laszlogergely]

Szep volt, ugyes volt ember miden tiszteletem.

[zachroberts]

good video on how NOT to remove king pins.

[laligoncz]

Szia Laci van két filterem amit nem tudom hol kell megtalálni a 4cxn. Tudnal segiteni?

[experienciacomanatureza]

tão bem zelada a maquina é a peça colada

[danielbryl]

Jeszcze nigdy tych czopów nie grzałem a zmieniłem tego setki.

[TheUltimate]

There its money to save, before the been broken...🤔

[jeffpeter]

] As of 2007, it had daily production of 3.921 million BOE (barrels of oil equivalent); but significantly smaller than a number of national companies. In 2008, this was approximately 3% of world production, which is less than several of the largest state-owned petroleum companies.

[piotrpartacz]

I was have the same problem only new differential repair

[spiroskalamos]

congrats
Very nice job.
can you tell me the code number from this color?

[davidtimms]

How the hell does a supposedly knowledgeable person let a machine component get in that state. Bloody joke.

[sdfgfgd]

может правильно все зроблено а вот насчет нарушения техники безопасности козелки должны а не кирпичи

[maSHEALY]

Every mechanic should have a kango in there toolbox ??

[edgemonsiteworksllc]

Why do people use under rated equipment. Jcd is about as cheap as you can get. The resell on them is nothing. Nobody that’s serious owns them

[davidtimms]

This guy is a joke its the O ring holding it you just took the top one out. Don’t anybody use this as instruction please.