Thrustmaster T-LCM Performance Brake Mod Kit By APEXV2R | Review

Buy it here:

[Tn]

Ordered the mod yesterday, luckily found your video now I feel better because you explain exactly what I hoped this mod work. Now time to wait (I live in Italy). Thanks!

[חגיתהחגיגית]

Amazing new studio you got there 😁 love it

[ChrisTingman]

I made this :) glad you like it! Great review as well buddy

[travisburdess]

In the final example of double red springs, just adjust the slider thats set at 100 in your example, and you can dial in any amount of braking % you want at the end of travel.

[benjaminduncan]

Finally received mine today, will try them out tonight after work 😁

[jimijames]

Nice review but I wish you would have shown us how you change them out on the load cell. (My T-lcm brake pedal broke so I have it held together with tie straps and electrical tape.)

[DavidGarcia-oint]

I just ordered these and hope they were worth the money! This was a great review video for it being your first! What kind of well is that? Is that one of those Simcore wheels?

[mrcael]

I know this video is old, but I hope you can answer. It's interesting to watch the different options be applied and watch the pedal get to 100% with less and less travel. Is that because of the loadcell? If so, how does that actually work? Why is it that you travel less but hit 100%? Is it not based on how far the silver rod goes down?

[benjaminduncan]

Just ordered, take 4 weeks to get to me in Australia 😭😭 any chance of a FFB etc video for the thrustmaster 🙃

[phatfel]

I noticed in your videos you went with purple white and black. Did you keep the brake force at 100?

[P_ounds]

I'm wondering if skateboard bushings would work the same?

[omaior]

Hello, how long did this mod take to arrive? Did you pay any import fees? Did the break pedal get progressive enough to justify 65$ for 4 pieces of rubber?

[dominicrobertdillonbrown]

buy yourself a set of m6 rubber spacers off ebay they will be far too hard to use as they are 90A hardness. Then bond them down to a flat board and make a small plastic wall around to make a mould tool, buy some casting silicon about 1-2kg kit pour into the mould tool degass if you got a degasser. allow to cure then peel back the silicon mould. Buy some urethane casting rubber ideally in 200g kits buy 30A shore, 40A shore and 50A shore, then you can mix and pour into the silicon mould, spray some glass (tough) or smooth plastic with wax or beeswax and lay on top of the tool to ensure a flat surface...and voila a ready made mould to cast as many as you need in various hardness. Trust me these will be FAR superior feel to 3D printed parts. These will be fully cross linked polymers NOT layer fused printed parts this will give an even better feel. Want any advice ask i am an experienced caster.

[stratcat]

It seems like it's a case of what you get used to? I dunno.. just thinking that makes sense lol

[ThisKory]

A year, later is this still holding up? How long did they last?

[cirebackwards]

Wow! Maybe I got a later version of the T-LCM because I have 2 red, preload with 3 washers and I tap the end of travel at exactly 100% of brake force (yes, brake force 100). The preload is entirely limited with 3 washers. I really had to push down hard to get the springs into the pedal.

[benjaminduncan]

Hi dori_N, what would the reason be that my pedal calibration tool is not registering my pedals. Please plug in device. And advice wild be great.

[jeffreytackett]

You know how to avoid the "I don't know, I'm not very good at words" situation?

Write an outline of what you plan to say, beforehand. Identify some applicable phrases and adjectives that apply to the product, and use them when the time comes.

Take it for what it's worth.

[Jonah-Hosein]

Pretty sure the loadcell in the tlcms have a 200kg loadcell

[aeppikx]

65 $ for 50cent materialcost of 3d print. ridicolous