Projection of Solids (Tamil)| Part 1-Intro & Drawing procedure | Lecture 10.1 | Engineering Graphics

A solid is a three-dimensional object, i.e. it should have three dimensions such as length, breadth, thickness etc. Various shapes of solids are considered such as prisms, pyramids, cylinder, cone etc. The topic "Projection of Solids" in Engineering Graphics describes how different 2D views of a solid has been drawn in a drawing sheet. The solid is usually located in the first quadrant formed by the principal planes and followed the first angle projection.
There are four different positions of a solid as follows,
1. Axis is parallel to both the planes
2. Axis is perpendicular to one plane and parallel to the other
3. Axis is inclined to one plane and parallel to the other
4. Axis is inclined to both the planes

Watch this part-1 Tamil video (Lecture 10.1) that explains the meaning of a solid, its positions and projections. Also, you'll learn how the simple projections of a solid are obtained when it is in the second position.

English Version:

For more videos about Engineering Graphics in both Tamil & English,
Click the following link to enter into the Channel Page :

Projection of Planes (Tamil) | Part 4 - Problem | Lecture 9.4 | Engineering Graphics

Projection of Planes (Tamil) | Part 3 - Problem | Lecture 9.3 | Engineering Graphics

Projection of Planes (Tamil) | Part 2 - Problems | Lecture 9.2 | Engineering Graphics

Projection of Planes (Tamil) | Part 1-Intro & Drawing procedure | Lecture 9.1 | Engineering Graphics

Projection of Lines (Tamil) | Part 5 - Problems | Lecture 8.5 | Engineering Graphics

Projection of Lines (Tamil) | Part 4 - Problems | Lecture 8.4 | Engineering Graphics

Projection of Lines (Tamil) | Part 3 - Problems | Lecture 8.3 | Engineering Graphics

Projection of Lines (Tamil) | Part 2 - Problems | Lecture 8.2 | Engineering Graphics

Projection of Lines(Tamil) | Part 1-Introduction & Drawing procedure | Lecture 8.1| Engineering Graphics

Projection of Points (Tamil)| Part 2-Problems | Lecture 7 | Engineering Graphics |Dr.S.Malligarjunan

Projection of Points(Tamil)|Part 1-Introduction & Drawing procedure| Lecture 6 |Engineering Graphics

Theory of Projection Part 1-Introduction(Tamil)| Lecture 4 |Engineering Graphics |Dr.S.Malligarjunan

Orthographic Projection (Tamil) | Theory of Projection Part 2 | Lecture 5 | Engineering Graphics

Dimensioning (Tamil) | Lecture 3 | Engineering Graphics | Principles | Methods | Dr.S.Malligarjunan

Line Types & Suitable Pencils (Tamil) | Lecture 2 | Engineering Graphics | Dr.S.Malligarjunan

Frequently used terms | Engg. Graphics | Must watch video| Tamil medium students| Dr.S.Malligarjunan

[shankeerthanshankeerthan]

understandable and teaching similar to my prof's lecture

[kirubakaranm]

Thanks a lot sir, it is very helpful to me

[dhanush_bgms]

Thanks a lot sir really amazing teach✨😎..

[shiningstars]

Please upload videos sir because exam are coming soon