Centurion D5 evo- motor fault. continuous, motor fault, diagnostics. fix

[zanelepinasehijohi]

I cannot begin to tell you how grateful my husband and I are, we replaced the battery but as you said bad boy needed to be taken out. Thank you so much

[TshepoDDH]

Thank you very very very much, you just made my day… tried this and it worked, I have been burning calories opening my gate for almost a week until I came across your video 🤙🏾

[issacard]

One year later and your video is still helping, thanks 🙌

[gerhardgriesel]

Thank you, I cleaned the sensor and we are up and running again

[abdullahmayet]

Thanx so much helped with my motor, had no corrosion but just wiped it and put it back, seems fine for now, thanx God bless u

[stuartmorgan]

Jubert ... you legend! Sorted out in 5 minutes flat. So appreciate your video.

[Sufy]

Thanks brother, been sitting here one hr until i seen this and its sorted just pulled it out blew it alil and put it back 👋🏼⭐️

[colinhudson]

Ive come across this fault in the past. It's not common and the board displays a motor fault and not a doss fault as it should .
Often it can also be a bad motor wire connection on the board.
I had it show this out of box because the terminal connection was not tightened properly on assembly.
Good tip to look out for .
I always carry test boards, doss and inner motors to eliminate faults .
These are fantastic motors and I swear vy them . I used them for near on 20 years amd been through all their models.

[propertyforauction]

Thankyou for your well explained video and for sharing your knowledge

[VincentMuir]

Thank you Jubert, works like a charm!

[khaleddesai]

Good morning

You are a star ✨✨✨ thanks you !!!

Been struggling 1 hour then found your video. Working hundreds now 👌🏻👌🏻👌🏻 thank you

[MbuleloNgqokola-delk]

Thank brother you've help me my one now working fine I cleaned sensor

[brandonbotha]

Good Day. This is actually a tacho meter. It counts the revolutions of the gear.

[MrFrederikbuitendag]

Tnx, been fighting for a week with it, did what you showed and it worked. 🙏🙏

[livomofokeng]

Wooow... this really worked 😅. Thank you soo soo much for your help🙏🙏.

[rlamprecht]

This also worked for me, thank you for sharing.

[christopherogrady]

thank you. I took your advice and it did what it should do. it worked.

[Dragonpalmmartialarts]

Thank you worked like a charm, much appreciated

[patrickfynn]

Brilliant Jubert, baie dankie! My error was "Drive Fault" but I figured close enough.
Disconnected the charger and power (which was only battery at the time, loadshedding 🙄). I unplugged the other thingy but this motor's only a few months old so just put it back in. Then plugged power & charger back in... et voila!
I guess this amounts to a restart of the system. Reboot for older folk... or IPL for us real old-timers 😂

[maya-pjou]

Very helpful, thank you. My gate works