OSPF Routing Configuration with 2 MikroTik Routers & Cisco Switch using GNS3

Simple OSPF Routing Configuration with 2 MikroTik Routers and Cisco Switch using GNS3 Simulator.

[Tools]
1.) GNS3
2.) MikroTik-CHR (Router)
3.) Cisco IOU (Switch)

[IP address and VLAN ID in every devices]
#####################################
A. Router 1 (MikroTik-A) :
* MikroTik-A (ether1) [192.200.100.1/26] -- VLAN: None
* MikroTik-A (ether2) [192.168.100.1/23] -- VLAN: 100
* MikroTik-A (ether2) [192.168.120.1/23] -- VLAN: 200

B. Router 2 (MikroTik-A) :
* MikroTik-B (ether1-DHCP) [192.168.122.161/24] -- VLAN: None
* MikroTik-B (ether2) [192.200.100.2/26] -- VLAN: None
* MikroTik-B (ether3) [192.168.10.1/27] -- VLAN: None

C. Cisco Switch :
* CiscoSwitch (eth0/0) -- VLAN: trunk
* CiscoSwitch (eth1/0) -- VLAN: 100
* CiscoSwitch (eth2/0) -- VLAN: 200

D. VPCS1 (PC1) :
* PC1 (eth0) [192.168.100.2/23] -- VLAN: 100

E. VPCS2 (PC2) :
* PC2 (eth0) [192.168.120.2/23] -- VLAN: 200

F. VPCS3 (PC-Server) :
* PC-Server (eth0) [192.168.10.2/27] -- VLAN: None

G. NAT1 (Internet) :
* NAT1 (nat0) [192.168.122.1/24] -- VLAN: None
#####################################

[My social media]
- LinkedIn: Wahyu Priambodo

Thanks for watching, see you on the next my video.